RESUMO

Introducción: Se han desarrollado materiales bioactivos para el recubrimiento pulpar directo con el objetivo de preservar la pulpa dentaria y mantener el diente por mayor tiempo en la cavidad oral. Objetivo: El objetivo de esta revisión fue evaluar la efectividad del uso de bioceramicos como material de recubrimiento directo pulpar para mantener la vitalidad pulpar en dientes primarios y permanentes con pulpitis reversible. Metodología: Se realizó una revisión sistemática con meta análisis. Se estudió el éxito en el tratamiento del mantenimiento de la vitalidad, el dolor postoperatorio y la decoloración. Se realizó una búsqueda Electrónica en las bases de datos: MEDLINE, EMBASE, COCHRANE, SCOPUS, LILACS, BBO. Se extrajeron los datos y se analizaron con Rev Man. Resultados: Se incluyeron ensayos clínicos aleatorizados en la cual se realizaron recubrimiento pulpar directo con silicatos tricalcicos comparado con otros materiales de recubrimiento. Comparando tres biocerámicos no se encontraron diferencias significativas en el mantenimiento de la vitalidad pulpar. En cuanto a la decoloración se observaron diferencias estadísticamente significativas a favor de Biodentine (p <0,001). Discusión: la relevancia clínica de estos hallazgos es discutible debido a su pequeña magnitud general y al alto riesgo de sesgo de los estudios incluidos.

Introduction: Bioactive materials have been developed for direct pulp capping in order to preserve the dental pulp and keep the tooth longer in the oral cavity. Objective: The objective of this review was to evaluate the effectiveness of the use of bioceramics as direct pulp capping material to maintain pulp vitality in primary and permanent teeth with reversible pulpitis. Methods: A systematic review with meta-analysis was performed. Success in treating vitality maintenance, postoperative pain, and discoloration was studied. An electronic search was carried out in the databases: MEDLINE, EMBASE, COCHRANE, SCOPUS, LILACS, BBO. Data were extracted and analyzed with Rev Man. Results: Randomized clinical trials in which direct pulp capping with tricalcium silicates was performed compared with other capping materials were included. Comparing three bioceramics, no significant differences were found in the maintenance of pulp vitality. Regarding discoloration, statistically significant differences were observed in favor of Biodentine (p <0.001). Discussion: the clinical relevance of these findings is debatable due to their small overall magnitude and the high risk of bias of the included studies.

RESUMO

The aim of this study was to assess by confocal laser microscope the depth of dentinal tubule penetration of two tricalcium silicate-based sealers promoted by two obturation techniques in curved canals compared with AHPlus. One hundred and twenty canals were divided into six groups (n = 20): BCSC-Bio-C Sealer (BC) and single-cone technique (SC); BCCW-BC and continuous condensation wave (CW); TFSC-Total Fill (TF) and SC; TFCW-TF and CW; AHSC-AH Plus (AH) and SC; AHCW-AH and CW. Data were analysed using the three-way ANOVA and Tukey's test (α = 5%). Penetration depth was significantly greater for TFCW than TFSC and greater for AHCW than AHSC (p < 0.05). There was no significant difference between BCCW and BCSC (p > 0.05). The penetration of TF was significantly greater (p < 0.05). The CW technique promoted greater intratubular penetration, except for the BC sealer.

Assuntos

RESUMO

Abstract This study evaluated the effect of heating on the physicochemical properties and surface changes of tricalcium silicate sealers. Three tricalcium silicate root canal sealers (Bio-C Sealer, BioRoot-RCS, EndoSequence BC Sealer), and one epoxy resin-based sealer (AH Plus; control) were tested. The effect of heating on setting time (ST) and flowability were assessed according to ANSI/ADA 57 and ISO 6876 standards. Solubility and dimensional change (DC) of the set sealers were evaluated at 24 hours and after 30 days; the pH of the water used in the DC testing was also measured. Tests were repeated with heated sealers in an oven at 100 °C for 1 min. SEM and EDS analysis were performed. Data were analyzed using One-Way ANOVA and Tukey post-hoc tests (α=5%). Heating decreased the ST for AH Plus and EndoSequence (p<0.05). Heating reduced flowability (p<0.05) and increased pH for AH Plus (p<0.05). The solubility of Bio-C (dried specimens) was not in accordance with the ANSI/ADA standard. The solubility of EndoSequence was significantly higher (p<0.05) when it was heated and dried after 30 days. DC of Bio-C (24 h and 30 days), BioRoot-RCS (30 days) and AH Plus (24 h and 30 days) were not in accordance with the standards. SEM and EDS analysis showed significant changes in sealer microstructure after heating. In conclusion, heating decreased the ST and increased the solubility of EndoSequence BC sealer. No significant changes in flowability, DC, and pH were identified for all three tricalcium silicate sealers after heat application. However, all sealers had significant surface changes.

Resumo Este estudo avaliou o efeito do aquecimento nas propriedades físico-químicas e nas alterações superficiais de cimentos de silicato tricálcico. Três cimentos endodônticos de silicato tricálcico (Bio-C Sealer, BioRoot-RCS, EndoSequence BC Sealer) e um cimento à base de resina epóxi (AH Plus) foram testados para avaliar o efeito do aquecimento no tempo de presa (TP) e escoamento de acordo com as normas ANSI/ADA 57 e ISO 6876. A solubilidade e alteração dimensional (AD) dos cimentos foram avaliadas após 24 horas e 30 dias. O pH da água usada no teste de AD também foi medido. Os testes foram repetidos com cimentos aquecidos em um forno a 100 °C por 1 min. Análises em MEV e EDS foram realizadas. Os dados foram analisados pelos testes de ANOVA-1 via e post hoc de Tukey (α=5%). O aquecimento diminuiu o TP para AH Plus e EndoSequence (p<0,05). O aquecimento reduziu o escoamento (p<0,05) e aumentou o pH do AH Plus (p<0,05). A solubilidade do Bio-C (amostras desidratadas) não estava de acordo com o padrão ANSI/ADA. A solubilidade da EndoSequence foi significativamente maior (p<0,05) quando aquecida e desidratada após 30 dias. As AD de Bio-C (24 h e 30 dias), BioRoot-RCS (30 dias) e AH Plus (24 h e 30 dias) não estavam de acordo com as normas ADA e ISO. A análise em MEV e EDS mostrou alterações significativas na estrutura dos cimentos após aquecimento. Em conclusão, o aquecimento diminuiu o TP e aumentou a solubilidade do cimento EndoSequence BC. Não foram identificadas mudanças significativas no escoamento, AD e pH para os cimentos de silicato tricálcico após aquecimento. Porém, todos os cimentos tiveram alterações significativas na superfície.

RESUMO

This study examines the impact of particle size on the setting behavior of tricalcium silicate powders. The setting behavior was evaluated using ISO 6876 indentation testing and isothermal induction calorimetry techniques. The objective was to compare the outcomes obtained from these methods and establish a correlation between particle size and setting characteristics. The cement pastes were manually mixed with a water-to-solid ratio of 0.66 for conducting indentation tests according to ISO 6876, while calorimetry measurements were performed using isothermal (conduction) calorimetry at room temperature. The findings demonstrate a significant influence of smaller particle sizes on accelerating the hydration process of cement pastes, resulting in a reduction of setting time by up to 24%. Moreover, the final setting times obtained through the indentation method closely approximate the inflection points of the acceleration curves acquired by calorimetry, with time deviations of less than 12% regardless of particle size.

RESUMO

Abstract The aim of this study was to investigate the physicochemical and biological properties of an experimental tricalcium silicate-based repair cement containing diclofenac sodium (CERD). For the physicochemical test, MTA, Biodentine and CERD were mixed and cement disc were prepared to evaluate the setting time and radiopacity. Root-end cavity were performed in acrylic teeth and filled with cements to analyze the solubility up to 7 days. Polyethylene tubes containing cements were prepared and calcium ions and pH were measured at 3h, 24h, 72h and 15 days. For the biological test, SAOS-2 were cultivated, exposed to cements extracts and cell proliferation were investigated by MTT assay at 6h, 24h and 48h. Polyethylene tubes containing cements were implanted into Wistar rats. After 7 and 30 days, the tubes were removed and processed for histological analyses. Parametric and nonparametric data were performed. No difference was identified in relation to setting time, radiopacity and solubility. Biodentine released more calcium ion than MTA and CERD; however, no difference between MTA and CERD were detected. Alkaline pH was observed for all cements and Biodentine exhibited highest pH. All cements promoted a raise on cell proliferation at 24h and 48h, except CERD at 48h. Biodentine stimulated cell metabolism in relation to MTA and CERD while CERD was more cytotoxic than MTA at 48h. Besides, no difference on both inflammatory response and mineralization ability for all cement were found. CERD demonstrated similar proprieties to others endodontic cements available.

Resumo O objetivo deste estudo foi investigar as propriedades físico-químicas e biológicas de um cimento reparador experimental à base de silicato de tricálcio contendo diclofenaco de sódio (CERD). Para o teste físico-químico, MTA, Biodentine e CERD foram manipulados e discos de cimentos foram preparados para avaliar o tempo de presa e a radiopacidade. Retrocavidades foram feitas em dentes de acrílico e preenchidas com cimentos para análise de solubilidade por 7 dias. Tubos de polietileno contendo cimentos foram preparados e os íons cálcio e o pH foram mensurados às 3h, 24h, 72h e 15 dias. Para o teste biológico, SAOS-2 foram cultivadas, expostas aos extratos de cimentos e a proliferação celular foi investigada pelo ensaio de MTT às 6h, 24h e 48h. Tubos de polietileno contendo cimentos foram implantados em ratos Wistar. Após 7 e 30 dias, os tubos foram removidos e processados para análises histológicas. Dados paramétricos e não paramétricos foram realizados. Nenhuma diferença foi identificada em relação ao tempo de presa, radiopacidade e solubilidade. Biodentine liberou mais íons de cálcio do que MTA e CERD; no entanto, nenhuma diferença entre MTA e CERD foi detectada. O pH alcalino foi observado para todos os cimentos e o Biodentine exibiu o pH mais alto. Todos os cimentos promoveram aumento na proliferação celular às 24h e 48h, exceto o CERD às 48h. Biodentine estimulou o metabolismo celular em relação ao MTA e CERD, enquanto CERD foi mais citotóxico do que MTA em 48h. Além disso, nenhuma diferença foi encontrada na resposta inflamatória e na capacidade de mineralização para todos os cimentos. CERD demonstrou propriedades semelhantes a outros cimentos endodônticos disponíveis.

RESUMO

Objetivo: Describir el tratamiento de un paciente que pre- sentó un incisivo superior permanente con exposición pulpar y desarrollo radicular incompleto utilizando Biodentine como material para la protección pulpar directa. Caso clínico: Un paciente de 9 años fue derivado para la evaluación y el tratamiento del diente 11. El examen clínico y radiográfico reveló la presencia de una fractura amelodentinaria, con exposición pulpar y desarrollo radicular incompleto. Luego de lavar y desinfectar el área de la fractura, se protegió la pulpa expuesta con Biodentine y se restauró la cavidad. El paciente fue citado para control a los 18 y 25 meses. En los controles se comprobó que el diente se mantuvo asintomático y funcional. Luego de 25 meses, el examen clínico y radiográfico confirmó la presencia de pulpa vital y el completo desarrollo del remanente radicular. Los resultados obtenidos en el presente caso clínico sugieren que el empleo de Biodentine puede ser considerado como una valiosa alternativa para la protección de la pulpa ex- puesta en dientes con desarrollo radicular incompleto (AU)

Aim: To describe the treatment of a patient that presented a permanent maxillary central incisor with pulp exposure and incomplete root formation, using Biodoentine as the material for direct pulp protection. Clinical case A 9-year-old male patient was referred for evaluation and treatment of tooth 11. The clinical and radio-graphic examination revealed the presence of a dentinoe- namel fracture, with pulp exposure and incomplete root for- mation. After cleaning and disinfecting the area, the exposed pulp was protected with Biodentine and the cavity was re- stored. The patient was scheduled for control after 18 and 25 months. In these evaluations, it was confirmed that the tooth remained asymptomatic and functional. After 25 months, the clinical and radiographic examination showed the presence of vital pulp and a completed development of the root. The obtained results of this clinical case suggest that Biodentine can be considered a valuable alternative for pulp capping in teeth with incomplete root formation (AU)

Assuntos

RESUMO

A root-end filling material is required to fill the root-end cavity without gaps or voids, to prevent root canal reinfection and to provide periapical healing. Thus, this study evaluated the volume of marginal gaps and voids of three root-end filling materials using microcomputed tomography (micro-CT). Thirty maxillary incisors were prepared and filled with gutta-percha and endodontic sealer. The specimens were scanned using micro-CT and distributed into three groups (n = 10): White MTA, MTA Repair HP, and Bio-C Repair. The root tips were resected at 90° to the longitudinal axis and the cavity (3 mm depth) was prepared with an ultrasonic tip. The materials were handled, and the cavities were filled. The specimens were rescanned and the percentual volume of gaps and voids were analyzed. The data were analyzed using Kruskal-Wallis and Dunn tests (p < .05). No statistical difference was found in the percentage of gaps among the tested materials (p > .05). White MTA presented less voids than Bio-C and MTA Repair HP (p < .05). The materials presented a similar percentual volume of gaps and White MTA presented less voids than other tested materials.

Assuntos

RESUMO

The aim of this in vitro study was to evaluate the antibacterial activity of calcium silicate repair cements and sealers against a dual-species planktonic aerobic model with different aging times and the ability to inhibit the formation of a mature 21-day-old multispecies anaerobic biofilm. The antibacterial activity of ProRoot MTA, MTA Angelus, Biodentine, BioRoot RCS and TotalFill BC sealer against a dual-species aerobic planktonic model, as well as measuring how materials were affected by aging, was evaluated using the Modified Direct Contact Test. Subsequently, the ability to inhibit the formation of a mature multispecies anaerobic biofilm was evaluated using scanning electron microscopy complemented with confocal laser scanning microscopy. Biodentine and BioRoot RCS had higher antibacterial action, and Biodentine was able to maintain its antibacterial action after a prolonged aging period in vitro. Calcium silicate repair cement MTA ProRoot and Biodentine had higher antibiofilm action.

Assuntos

RESUMO

AIM: To analyse the discolouration, radiopacity, pH and calcium ion release of Biodentine (BD), Bio-C repair (BCR) and Bio-C temp (BCT), as well as their biological effects on human dental pulp cells (hDPCs). METHODOLOGY: Sixty-four extracted bovine incisors were prepared to simulate crown fractures with pulp exposure and open root apex. The roots were filled using a mixture of agar and blood (control), and BD, BCR or BCT were placed over this mixture. Colour assessment analyses of the samples were performed before and immediately after material insertion and repeated at 30 and 90 days, using a spectrophotometer. The colour change of each specimen was evaluated at the crown and calculated based on the CIELab colour space. Digital radiographs were acquired for radiopacity analysis. hDPCs were placed in contact with different dilutions of culture media previously exposed to such materials and tested for cell viability using the MTT assay. The pH and calcium ion release of all materials were measured after 24 h; the data were assessed using one-way analysis of variance (ANOVA). Cell viability was analysed by two-way ANOVA. Differences in colour parameters and wound-healing data were assessed by two-way repeated measures ANOVA (α = 0.05). Tukey's and Dunnett's tests were used to compare the experimental groups with the control group. RESULTS: BCR had grater radiopacity and smaller colour alteration (ΔEab/ΔE00) than the other materials tested (p < .005; p < .001). No significant differences in pH were found amongst the tested materials (p > .05). BCT was associated with the largest release of calcium ions (p < .0001). BD had cell viability similar to that of the control at the lowest dilutions, and BCR was similar to that of the control, regardless of the dilution tested (p > .05). BCT had a lower percentage of viability than that of the control at all tested dilutions (p < .0001). Cell migration rates in BD and BCR were similar to those in the control group after 24 h and 48 h (p > .05), whilst BCT had larger voids than the control in both periods (p < .0001). CONCLUSIONS: BCR, BCT and BD were associated with tooth discolouration. BCR had the lowest staining values, the highest radiopacity and viability greater than 80% hDPCs.

Assuntos

RESUMO

Paciente pediátrico de 9 años y género masculino, que acudió para valoración odontológica por presentar dolor dental tras ingerir alimentos fríos. El diagnóstico definitivo quedó establecido como pulpitis reversible del molar 3.6, decidiendo conducta terapéutica de recubrimiento pulpar directo con silicato tricálcico para lograr apexificación. La decisión clínica resultó exitosa, el seguimiento de la evolución permitió apreciar que el diente mantuvo su vitalidad, las raíces continuaron desarrollándose y no aparecieron signos o síntomas de lesiones periapicales.

9-year-old pediatric male patient, who came for dental evaluation because of dental pain after eating cold food. The definitive diagnosis was established as reversible pulpitis of the molar 3.6, deciding on the therapeutic behavior of the direct pulp coating with tricalcium silica to achieve apexification. The clinical decision was successful, the follow-up of the evolution identified the affected tooth as vital, the roots continued to develop, and no signs or symptoms of periapical lesions appeared.

Assuntos