RESUMO
Legumes are abundant sources of proteins, and white common bean proteins play an important role in air-water interface properties. This study aims to investigate the technical-functional properties of white common bean protein isolate (BPI) as a function of pH, protein concentration, and guar gum (GG) presence. BPI physicochemical properties were analyzed in terms of solubility, zeta potential, and mean particle diameter at pH ranging from 2 to 9, in addition to water-holding capacity (WHC), oil-holding capacity (OHC), and thermogravimetric analysis. Protein dispersions were evaluated in terms of dynamic, interfacial, and foam-forming properties. BPI showed higher solubility (>80 %) at pH 2 and above 7. Zeta potential and mean diameter ranged from 15.43 to -34.08 mV and from 129.55 to 139.90 nm, respectively. BPI exhibited WHC and OHC of 1.37 and 4.97 g/g, respectively. Thermograms indicated decomposition temperature (295.81 °C) and mass loss (64.73 %). Flow curves indicated pseudoplastic behavior, with higher η100 values observed in treatments containing guar gum. The behavior was predominantly viscous (tg δ > 1) at lower frequencies, at all pH levels, shifting to predominantly elastic at higher frequencies. Equilibrium surface tension (γeq) ranged from 43.87 to 41.95 mN.m-1 and did not decrease with increasing protein concentration under all pH conditions. All treatments exhibited Ï < 15°, indicating predominantly elastic surface films. Foaming properties were influenced by higher protein concentration and guar gum addition, and the potential formation of protein-polysaccharide complexes favored the kinetic stability of the system.
Assuntos
Galactanos , Mananas , Phaseolus , Gomas Vegetais , Proteínas de Plantas , Solubilidade , Propriedades de Superfície , Gomas Vegetais/química , Galactanos/química , Mananas/química , Concentração de Íons de Hidrogênio , Proteínas de Plantas/química , Phaseolus/química , Tamanho da Partícula , Água/químicaRESUMO
Using green techniques to convert native starches into nanoparticles is an interesting approach to producing stabilizers for Pickering emulsions, aiming at highly stable emulsions in clean label products. Nanoprecipitation was used to prepare the Pickering starch nanoparticles, while ultrasound technique has been used to modulate the size of these nanoparticles at the same time as the emulsion was developed. Thus, the main objective of this study was to evaluate the stabilizing effect of cassava starch nanoparticles (SNP) produced by the nanoprecipitation technique combined with ultrasound treatment carried out in the presence of water and oil (more hydrophobic physicochemical environment), different from previous studies that carry out the mechanical treatment only in the presence of water. The results showed that the increased ultrasound energy input could reduce particle size (117.58 to 55.75â¯nm) and polydispersity (0.958 to 0.547) in aqueous dispersions. Subsequently, Pickering emulsions stabilized by SNPs showed that increasing emulsification (ultrasonication) time led to smaller droplet sizes and monomodal size distribution. Despite flocculation, long-term ultrasonication (6 and 9â¯min) caused little variation in the droplet size after 7â¯days of storage. The cavitation effects favored the interaction between oil droplets through weak attraction forces and particle sharing, favoring the Pickering stabilization against droplet coalescence. Our results show the potential to use only physical modifications to obtain nanoparticles that can produce coalescence-stable emulsions that are environmentally friendly.
Assuntos
Emulsões , Manihot , Nanopartículas , Tamanho da Partícula , Amido , Manihot/química , Amido/química , Emulsões/química , Nanopartículas/química , Água/química , Sonicação/métodos , FloculaçãoRESUMO
Moisture activated dry granulation (MADG) is an attractive granulation process. However, only a few works have explored modified drug release achieved by MADG, and to the best of the authors knowledge, none of them have explored gastroretention. The aim of this study was to explore the applicability of MADG process for developing gastroretentive placebo tablets, aided by SeDeM diagram. Floating and swelling capacities have been identified as critical quality attributes (CQAs). After a formulation screening step, the type and concentration of floating matrix formers and of binders were identified as the most relevant critical material attributes (CMAs) to investigate in ten formulations. A multiple linear regression analysis (MLRA) was applied against the factors that were varied to find the design space. An optimized product based on principal component analysis (PCA) results and MLRA was prepared and characterized. The granulate was also assessed by SeDeM. In conclusion, granulates lead to floating tablets with short floating lag time (<2 min), long floating duration (>4 h), and showing good swelling characteristics. The results obtained so far are promising enough to consider MADG as an advantageous granulation method to obtain gastroretentive tablets or even other controlled delivery systems requiring a relatively high content of absorbent materials in their composition.
Assuntos
Química Farmacêutica , Composição de Medicamentos , Liberação Controlada de Fármacos , Excipientes , Comprimidos , Composição de Medicamentos/métodos , Química Farmacêutica/métodos , Excipientes/química , Preparações de Ação Retardada , Solubilidade , Água/química , Análise de Componente PrincipalRESUMO
The present study utilizes molecular dynamics simulations to examine how different anions compete for protein solvation in aqueous solutions of ionic liquids (ILs). Ubiquitin is used as model protein and studied in IL mixtures sharing the same cation, 1-ethyl-3-methylimidazolium (EMIM), and two different anions in the same solution, from combinations of dicyanamide (DCA), chloride (Cl), nitrate (NO3), and tetrafluoroborate (BF4). Our findings reveal that specific interactions between anions and the protein are paramount in IL solvation, but that combinations of anions are not additive. For example, DCA exhibits a remarkable ability to form hydrogen bonds with the protein, resulting in a significantly stronger preferential binding to the protein than other anions. However, the combination of DCA with NO3, which also forms hydrogen bonds with the protein, results in a smaller preferential solvation of the protein than the combination of DCA with chloride ions, which are weaker binders. Thus, combining anions with varying affinities for the protein surface modulates the overall ion accumulation through nonadditive mechanisms, highlighting the importance of the understanding of competition for specific interaction sites, cooperative binding, bulk-solution affinity, and overall charge compensations, on the overall solvation capacity of the solution. Such knowledge may allow for the design of novel IL-based processes in biotechnology and material science, where fine-tuning protein solvation is crucial for optimizing performance and functionality.
Assuntos
Ânions , Líquidos Iônicos , Simulação de Dinâmica Molecular , Água , Líquidos Iônicos/química , Ânions/química , Água/química , Ubiquitina/química , Ligação de Hidrogênio , Solubilidade , Imidazóis/químicaRESUMO
In this study, lignin derived from corncobs was chemically modified by substituting the hydroxyl groups present in its structure with methacrylate groups through a catalytic reaction using methacrylic anhydride, resulting in methacrylated lignin (ML). These MLs were incorporated in polymerization reaction of the monomer 2-[(acryloyloxy)ethyl trimethylammonium] chloride (Cl-AETA) and Cl-AETA, Cl-AETA/ML polymers were obtained, characterized (spectroscopic, thermal and microscopic analysis), and evaluated for removing Cr (VI) and As (V) from aqueous media in function of pH, contact time, initial metal concentrations and adsorbent amount. The Cl-AETA/ML polymers followed the Langmuir adsorption model for the evaluated metal anions and were able to remove up to 91 % of Cr (VI) with a qmax (maximum adsorption capacity) of 201 mg/g, while for As (V), up to 60 % could be removed with a qmax of 58 mg/g. The results demonstrate that simple modifications in lignin enhance its functionalization and properties, making it suitable for removing contaminants from aqueous media, showing promising results for potential future applications.
Assuntos
Cromo , Lignina , Poluentes Químicos da Água , Lignina/química , Cromo/química , Cromo/isolamento & purificação , Adsorção , Poluentes Químicos da Água/química , Poluentes Químicos da Água/isolamento & purificação , Purificação da Água/métodos , Polímeros/química , Polímeros/síntese química , Água/química , Concentração de Íons de Hidrogênio , PolimerizaçãoRESUMO
Increases in hydrological extremes, including drought, are expected for Amazon forests. A fundamental challenge for predicting forest responses lies in identifying ecological strategies which underlie such responses. Characterization of species-specific hydraulic strategies for regulating water-use, thought to be arrayed along an 'isohydric-anisohydric' spectrum, is a widely used approach. However, recent studies have questioned the usefulness of this classification scheme, because its metrics are strongly influenced by environments, and hence can lead to divergent classifications even within the same species. Here, we propose an alternative approach positing that individual hydraulic regulation strategies emerge from the interaction of environments with traits. Specifically, we hypothesize that the vertical forest profile represents a key gradient in drought-related environments (atmospheric vapor pressure deficit, soil water availability) that drives divergent tree water-use strategies for coordinated regulation of stomatal conductance (gs) and leaf water potentials (ΨL) with tree rooting depth, a proxy for water availability. Testing this hypothesis in a seasonal eastern Amazon forest in Brazil, we found that hydraulic strategies indeed depend on height-associated environments. Upper canopy trees, experiencing high vapor pressure deficit (VPD), but stable soil water access through deep rooting, exhibited isohydric strategies, defined by little seasonal change in the diurnal pattern of gs and steady seasonal minimum ΨL. In contrast, understory trees, exposed to less variable VPD but highly variable soil water availability, exhibited anisohydric strategies, with fluctuations in diurnal gs that increased in the dry season along with increasing variation in ΨL. Our finding that canopy height structures the coordination between drought-related environmental stressors and hydraulic traits provides a basis for preserving the applicability of the isohydric-to-anisohydric spectrum, which we show here may consistently emerge from environmental context. Our work highlights the importance of understanding how environmental heterogeneity structures forest responses to climate change, providing a mechanistic basis for improving models of tropical ecosystems.
Assuntos
Florestas , Árvores , Água , Água/metabolismo , Água/fisiologia , Árvores/fisiologia , Brasil , Secas , Transpiração Vegetal/fisiologia , Solo/química , Folhas de Planta/fisiologiaRESUMO
We tested an approach to estimate daily canopy net photosynthesis, A, based on estimates of transpiration, E, using measurements of sap flow and water-use efficiency, ω, by measuring δ13C in CO2 respired from shoots in the canopies of two conifers (Podocarpaceae) native to New Zealand. The trees were planted in adjacent 20-year-old stands with the same soil and environmental conditions. Leaf area index was lower for Dacrycarpus dacrydioides D.Don in Lamb (1.34 m2 m-2) than for Podocarpus totara G.Benn. ex D.Don var. totara (2.01 m2 m-2), but mean (± standard error) stem diameters were the same at 152 ± 21 mm for D. dacrydioides and 154 ± 25 mm for P. totara. Over a 28-day period, daily A (per unit ground area) ranged almost five-fold but there were no significant differences between species (mean 2.73 ± 1.02 gC m-2 day-1). This was attributable to higher daily values of E (2.63 ± 0.83 mm day-1) and lower ω (1.35 ± 0.53 gC kg H2O-1) for D. dacrydioides compared with lower E (1.82 ± 0.72 mm day-1) and higher ω (1.90 ± 0.77 gC kg H2O-1) for P. totara. We attributed this to higher nitrogen availability and nitrogen concentration per unit foliage area, Na, and greater exposure to irradiance in the D. dacrydioides canopy compared with P. totara. Our findings support earlier observations that D. dacrydioides is more adapted to sites with poor drainage. In contrast, the high retention of leaf area and maintaining low rates of transpiration by P. totara, resulting in higher water-use efficiency, is an adaptive response to survival in dry conditions. Our findings show that physiological adjustments for two species adapted to different environments led to similar canopy photosynthesis rates when the trees were grown in the same conditions. We demonstrated consistency between whole-tree and more intensive shoot-scale measurements, confirming that integrated approaches are appropriate for comparative estimates of carbon uptake in stands with different species.
Assuntos
Fotossíntese , Estômatos de Plantas , Água , Fotossíntese/fisiologia , Água/metabolismo , Água/fisiologia , Estômatos de Plantas/fisiologia , Brotos de Planta/fisiologia , Traqueófitas/fisiologia , Traqueófitas/metabolismo , Transpiração Vegetal/fisiologia , Adaptação Fisiológica , Árvores/fisiologia , Folhas de Planta/fisiologia , Folhas de Planta/metabolismo , Nova ZelândiaRESUMO
This study presents the potential role of deep eutectic solvents (DESs) in a lipase-catalyzed hydrolysis reaction as a co-solvent in an aqueous solution given by a phosphate buffer. Ammonium salts, such as choline chloride, were paired with hydrogen bond donors, such as urea, 1,2,3-propanetriol, and 1,2 propanediol. The hydrolysis of p-nitrophenyl laureate was carried out with the lipase Candida antarctica Lipase B (CALB) as a reaction model to evaluate the solvent effect and tested in different DES/buffer phosphate mixtures at different % w/w. The results showed that two mixtures of different DES at 25 % w/w were the most promising solvents, as this percentage enhanced the activities of CALB, as evidenced by its higher catalytic efficiency (kcatKM). The solvent analysis shows that the enzymatic reaction requires a reaction media rich in water molecules to enable hydrogen-bond formation from the reaction media toward the enzymatic reaction, suggesting a better interaction between the substrate and the enzyme-active site. This interaction could be attributed to high degrees of freedom influencing the enzyme conformation given by the reaction media, suggesting that CALB acquires a more restrictive structure in the presence of DES or the stabilized network given by the hydrogen bond from water molecules in the mixture improves the enzymatic activity, conferring conformational stability by solvent effects. This study offers a promising approach for applications and further perspectives on genuinely green industrial solvents.
Assuntos
Solventes Eutéticos Profundos , Proteínas Fúngicas , Ligação de Hidrogênio , Lipase , Água , Lipase/química , Lipase/metabolismo , Água/química , Solventes Eutéticos Profundos/química , Proteínas Fúngicas/química , Catálise , Hidrólise , Solventes/química , Biocatálise , CinéticaRESUMO
Vulnerability curves (VCs) have been measured extensively to describe the differences in plant vulnerability to cavitation. Although the roles of hydraulic conductivity (Ks,max) and hydraulic safety (P50, embolism resistance), both of which are parameters of VCs ('sigmoidal' type), in tree demography have been evaluated across different forests, the direct linkages between VCs and tree demography are rarely explored. In this study, we combined measured VCs and plot data of 16 tree species in Panamanian seasonal tropical forests to investigate the connections between VCs and tree mortality, recruitment and growth. We found that the mortality and recruitment rates of evergreen species were most significantly positively correlated with P50. However, the mortality and recruitment rates of deciduous species only exhibited significant positive correlations with parameter a, which describes the steepness of VCs and indicates the sensitivity of conductivity loss with water potential decline, but is often neglected. These differences among evergreen and deciduous species may contribute to the poor performance of existing quantitative relationships (such as the fitting relationships for all 16 species) in capturing tree mortality and recruitment dynamics. Additionally, evergreen species presented a significant positive relationship between relative growth rate (RGR) and Ks,max, while deciduous species did not display such relationship. The RGR of both evergreen and deciduous species also displayed no significant correlations with P50 and a. Further analysis demonstrated that species with steeper VCs tended to have high mortality and recruitment rates, while species with flatter VCs were usually those with low mortality and recruitment rates. Our results highlight the important role of parameter a in tree demography, especially for deciduous species. Given that VC is a key component of plant hydraulic models, integrating measured VC rather than optimizing its parameters will help improve the ability to simulate and predict forest response to water availability.
Assuntos
Modelos Biológicos , Caules de Planta , Árvores , Árvores/fisiologia , Árvores/crescimento & desenvolvimento , Caules de Planta/fisiologia , Caules de Planta/crescimento & desenvolvimento , Florestas , Água/fisiologia , Água/metabolismo , PanamáRESUMO
The present study examined different concentrations of the butylated hydroxytoluene (BHT) inhibitor on the kinetics of conversion, polymerization shrinkage stress, and other correlated physicochemical properties of experimental resin composites (ERC). A model composite was formulated with 75 wt% filler containing 0.5 wt% camphorquinone and 1 wt% amine with BHT concentrations of 0.01 wt% (BHT-0.01); 0.1 wt% (BHT-0.1); 0.25 wt% (BHT-0.25); 0.5 wt% (BHT-0.5); 1 wt% (BHT-1), and control (no BHT). They were tested on polymerization shrinkage stress (PSS; n = 5), degree of conversion (DC; n = 3), maximum polymerization rate (RpMAX; n = 5), water sorption (Wsp; n = 0), and solubility (Wsl; n = 10), flexural strength (FS; n = 10), flexural modulus (FM; n = 10), Knoop microhardness (KH; n = 10), and microhardness reduction (HR; n = 10). Data concerning these tests were submitted to one-way ANOVA and Tukey's test (α = 0.05; ß = 0.2). BHT-0.25, BHT-0.5, and BHT-1 showed a gradually significant decrease in PSS (p = 0.037); however, BHT-1 demonstrated a decrease in the physicochemical properties tested. Thus, within the limitations of this study, it was possible to conclude that BHT concentrations between 0.25 and 0.5 wt% are optimal for reducing shrinkage stress without affecting other physicochemical properties of ERCs.