RESUMO

Bakery products, including biscuits, cakes and breads, generally present a high content of simple sugars of rapid absorption, high fat content and low amount of dietary fiber, which make them highly caloric foods. Although sucrose is a very important ingredient in bakery products for its preservation characteristics and a significant source of energy, there is a growing interest in replacing this sugar with alternative substances, such as high-intensity sweeteners (HIS) that provide sweetness with no or low calories. In Brazil, there is no data on the use of HIS in this class of food. Therefore, the objective of this study was to evaluate the presence of HIS in baked food commercially available in the country and estimate the dietary exposure to these food additives. For that, an analytical method was established for the simultaneous determination of nine HIS in bakery products using ultra-high performance liquid chromatography coupled to tandem mass spectrometry (UHPLC-MS/MS). Sample preparation steps were required based on mechanical kneading for homogenization, hexane extraction of fats, dilution in mobile phase and vortex homogenization, prior to injection into the system. The results obtained during validation showed that coefficients of variation (CV%) for precision were lower than 13.8% and the accuracy was between 91.6% and 109.1%. Aspartame, acesulfame potassium, sodium cyclamate, saccharin, sucralose and steviol glycosides were found in the samples, used alone or in combinations of up five substances. Steviol glycosides were the most found HIS in biscuit samples, while sucralose was the most common sweetener in cake and bread samples. Analysis of product labels revealed only three different claims, .i.e. 'no sugar', 'no added sugar' and 'zero sugar', with the latter being found in 70% of the samples. Exposure to HIS through the consumption of bakery products estimated per eating occasion showed no concerns regarding toxicological risk.

Assuntos

RESUMO

The use of suitable analytical techniques for the detection of adulteration, falsification, deliberate substitution, and mislabeling of foods has great importance in the industrial, scientific, legislative, and public health contexts. This way, this work reports an integrative review with a current analytical approach for food authentication, indicating the main analytical techniques to identify adulteration and perform the traceability of chemical components in processed and non-processed foods, evaluating the authenticity and geographic origin. This work presents results from a systematic search in Science Direct® and Scopus® databases using the keywords "authentication" AND "food", "authentication," AND "beverage", from published papers from 2013 to, 2024. All research and reviews published were employed in the bibliometric analysis, evaluating the advantages and disadvantages of analytical techniques, indicating the perspectives for direct, quick, and simple analysis, guaranteeing the application of quality standards, and ensuring food safety for consumers. Furthermore, this work reports the analysis of natural foods to evaluate the origin (traceability), and industrialized foods to detect adulterations and fraud. A focus on research to detect adulteration in milk and dairy products is presented due to the importance of these products in the nutrition of the world population. All analytical tools discussed have advantages and drawbacks, including sample preparation steps, the need for reference materials, and mathematical treatments. So, the main advances in modern analytical techniques for the identification and quantification of food adulterations, mainly milk and dairy products, were discussed, indicating trends and perspectives on food authentication.

Assuntos

RESUMO

Polycyclic aromatic compounds (PACs) encompass a wide variety of organic analytes that have mutagenic and carcinogenic potentials for human health and are recalcitrant in the environment. Evaluating PACs levels in fuel (e.g., gasoline and diesel), food (e.g., grilled meat, fish, powdered milk, fruits, honey, and coffee) and environmental (e.g., industrial effluents, water, wastewater and marine organisms) samples are critical to determine the risk that these chemicals pose. Deep eutectic solvents (DES) have garnered significant attention in recent years as a green alternative to traditional organic solvents employed in sample preparation. DES are biodegradable, have low toxicities, ease of synthesis, low cost, and a remarkable ability to extract PACs. However, no comprehensive assessment of the use of DESs for extracting PACs from fuel, food and environmental samples has been performed. This review focused on research involving the utilization of DESs to extract PACs in matrices such as PAHs in environmental samples, NSO-HET in fuels, and bisphenols in foods. Chromatographic methods, such as gas chromatography (GC) and high-performance liquid chromatography (HPLC), were also revised, considering the sensibility to quantify these compound types. In addition, the characteristics of DES and advantages and limitations for PACs in the context of green analytical chemistry principles (GAC) and green profile based on metrics provide perspective and directions for future development.

Assuntos

RESUMO

The food industry has grown with the demands for new products and their authentication, which has not been accompanied by the area of analysis and quality control, thus requiring novel process analytical technologies for food processes. An electronic tongue (e-tongue) is a multisensor system that can characterize complex liquids in a fast and simple way. Here, we tested the efficacy of an impedimetric microfluidic e-tongue setup - comprised by four interdigitated electrodes (IDE) on a printed circuit board (PCB), with four pairs of digits each, being one bare sensor and three coated with different ultrathin nanostructured films with different electrical properties - in the analysis of fresh and industrialized coconut water. Principal Component Analysis (PCA) was applied to observe sample differences, and Partial Least Squares Regression (PLSR) was used to predict sample physicochemical parameters. Linear Discriminant Analysis (LDA) and Partial Least Square - Discriminant Analysis (PLS-DA) were compared to classify samples based on data from the e-tongue device. Results indicate the potential application of the microfluidic e-tongue in the identification of coconut water composition and determination of physicochemical attributes, allowing for classification of samples according to soluble solid content (SSC) and total titratable acidity (TTA) with over 90% accuracy. It was also demonstrated that the microfluidic setup has potential application in the food industry for quality assessment of complex liquid samples.

Assuntos

RESUMO

Food additives are chemical compounds intentionally added during foodstuff production to control technological functions, such as pH, viscosity, stability (color, flavor, taste, and odor), homogeneity, and loss of nutritional value. These compounds are fundamental in inhibition the degradation process and prolonging the shelf life of foodstuffs. However, their inadequate employment or overconsumption can adversely affect consumers' health with the development of allergies, hematological, autoimmune, and reproductive disorders, as well as the development of some types of cancer. Thus, the development and application of simple, fast, low-cost, sensitivity, and selectivity analytical methods for identifying and quantifying food additives from various chemical classes and in different foodstuffs are fundamental to quality control and ensuring food safety. This review presents trends in the detection of food additives in foodstuffs using differential pulse voltammetry and square wave voltammetry, the main pulse voltammetric techniques, indicating the advantages, drawbacks, and applicability in food analysis. Are discussed the importance of adequate choices of working electrode materials in the improvements of analytical results, allowing reliable, accurate, and inexpensive voltammetric methods for detecting these compounds in foodstuffs samples.

Assuntos

RESUMO

Solid-phase microextraction and comprehensive multidimensional gas chromatography represent two milestone innovations that occurred in the field of separation science in the 1990s. They have a common root in their introduction and have found a perfect coupling in their evolution and applications. This review will focus on food analysis, where the paradigm has changed significantly over time, moving from a targeted analysis, focusing on a limited number of analytes at the time, to a more holistic approach for assessing quality in a larger sense. Indeed, not only some major markers or contaminants are considered, but a large variety of compounds and their possible interaction, giving rise to the field of foodomics. In order to obtain such detailed information and to answer more sophisticated questions related to food quality and authenticity, the use of SPME-GC × GC-MS has become essential for the comprehensive analysis of volatile and semi-volatile analytes. This article provides a critical review of the various applications of SPME-GC × GC in food analysis, emphasizing the crucial role this coupling plays in this field. Additionally, this review dwells on the importance of appropriate data treatment to fully harness the results obtained to draw accurate and meaningful conclusions.

Assuntos

RESUMO

Introducción. El Capítulo Nacional URUGUAYFOODS, perteneciente a la Red Latinoamericana de Composición de Alimentos (LATINFOODS, INFOODS, FAO), realizó recientemente una investigación para identificar cuáles tablas/bases de datos de composición de alimentos (TCA/ BDCA) utilizan los profesionales nacionales, así como la percepción de sus limitaciones, con el fin de ser tenidos en cuenta en la creación de la nueva BDCA nacional. Objetivo. Caracterizar el uso de las TCA/BDCA de composición de alimentos y describir las características y limitaciones de las mismas, mediante el análisis de la encuesta realizada a profesionales del área de salud, nutrición y alimentos de Uruguay en el año 2022. Materiales y métodos. Se trató de un estudio cuantitativo, descriptivo y transversal. La información fue obtenida a través de una encuesta de participación voluntaria. La muestra estuvo conformada por 94 profesionales nacionales. Se analizó la variable uso y frecuencia de uso de dichas herramientas respecto a la edad y población específica con la que trabaja el profesional encuestado. Resultados. La preferencia de uso fue la base de datos USDA y CENEXA, antes que la TCAU, resultando en una debilidad importante en todas las áreas en donde se utilicen estos datos, pues no refleja los hábitos ni costumbres de la población. Conclusiones. Los potenciales usuarios de la nueva BDCA nacional pretenden que sea de acceso fácil y gratuito, en idioma español, en formato digital, con información actualizada y con posibilidad de elección de datos en porción o cada 100 gramos(AU)

Introduction. The URUGUAYFOODS National Chapter, belonging to the Latin American Food Composition Network (LATINFOODS, INFOODS, FAO), recently carried out an investigation to identify which food composition tables and databases (TCA and BDCA) are used by national professionals, as well as the perception of their limitations, in order to be taken into account in the creation of the new national BDCA. Objective. Characterize the use of TCAs and BDCAs for food composition and describe their characteristics and limitations through the analysis of the survey carried out among professionals in the area of health, nutrition, and food in Uruguay in 2022. Materials and methods. It was a quantitative, descriptive, and cross-sectional study. The information was obtained through a voluntary participation survey. The sample consisted of 94 national professionals. The variable use and frequency of these tools were analyzed with respect to the age and specific populations with which the surveyed professional works. Results. The preference for use was the USDA and CENEXA databases rather than the TCAU, resulting in a significant weakness in all areas where these data are used since they do not reflect the habits and customs of the population. Conclusions. Potential users of the new national BDCA want it to be easily and freely accessible, in Spanish, in digital format, with up-to-date information, and with the possibility of choosing data in portions or every 100 grams(AU)

Assuntos

RESUMO

The intricate balance between the beneficial and harmful effects of selenium (Se) intake means that its quantification in food needs to be done correctly. Therefore, in this review, we systematized 105 articles to identify the most studied methodologies, analytical techniques, and food matrices. Among the analytical techniques employed, inductively coupled plasma mass spectrometry (ICP-MS) (n = 29) emerged as the most commonly used method. The most prevalent hydrolysis methodology to digest Se in food matrices involved the use of nitric acid combined with ultrasound, which improved both the yield and digestion time. Optimal recovery values were achieved when total Se quantification accounted for the sum of Se(IV) and Se(VI) (94.4-99.4%) and for SeCys (88-96.5%). These findings are relevant for advancing methodological approaches, and their results emphasize the importance of developing alternative, faster, and lower-cost protocols for Se quantification in foods and beverages.

Assuntos

RESUMO

Objetivo ­ Realizar análises bromatológicas de umidade, proteínas, pH e cinzas em missôs artesanais. A fermentação é um processo biotecnológico que tem sido utilizado para modificar e produzir alimentos desde a antiguidade. Nas últimas duas décadas, o interesse nos efeitos benéficos dos fermentados na saúde humana aumentou e tornou essa categoria de alimentos cada vez mais popular principalmente no Oriente. No mercado há uma ampla variedade de pastas à base de soja fermentada por microorganismos sendo conhecido popularmente como missô. Métodos ­ As análises realizadas foram secagem direta em estufa a 105°C graus para determinação da umidade (%) e calcinação em mufla para cinzas (%), determinação de pH por meio do peagâmetro e análise de proteínas através do teste de Biureto. Resultados ­ No presente estudo as amostras obtiveram um teor de umidade entre 52,71% a 60,48%, teor de cinzas variando de 1,12% a 22,7%, pH entre 5,35 e 8,68, e um teor de proteínas variando de 11,1% a 13,2%. Discussão ­ Foi interpretado e comparado os resultados obtidos com as análises de outros estudos, além disso, apontado algumas questões do campo bromatológico das pesquisas dos estudos comparados e as limitações do presente trabalho. Conclusão ­ O processo fermentativo de alimentos com microorganismos resulta em um produto diferenciado que pode ser benéfico a saúde com diferentes características organolépticas. Nossos resultados foram parcialmente semelhantes com outras pesquisas sendo que

Assuntos

RESUMO

Sample preparation frequently is considered the most critical stage of the analytical workflow. It affects the analytical throughput and costs; moreover, it is the primary source of error and possible sample contamination. To increase efficiency, productivity, and reliability, while minimizing costs and environmental impacts, miniaturization and automation of sample preparation are necessary. Nowadays, several types of liquid-phase and solid-phase microextractions are available, as well as different automatization strategies. Thus, this review summarizes recent developments in automated microextractions coupled with liquid chromatography, from 2016 to 2022. Therefore, outstanding technologies and their main outcomes, as well as miniaturization and automation of sample preparation, are critically analyzed. Focus is given to main microextraction automation strategies, such as flow techniques, robotic systems, and column-switching approaches, reviewing their applications to the determination of small organic molecules in biological, environmental, and food/beverage samples.

Assuntos