RESUMO
The conformational changes of poly(maleic anhydride-alt-styrene) (PSMA) modified with different amino acids (PSMA-Aa) were studied in an aqueous medium as a function of ionic strength and pH. The specific viscosity of PSMA-Aa decreased with increasing salt concentration due to a more compact conformation. There was a decrease in surface tension with increasing concentrations of the modified polyelectrolyte having a greater effect for the PSMA modified with l-phenylalanine at pH 7.0, demonstrating a greater surface-active character. The conformational changes were also confirmed by molecular dynamics studies, indicating that PSMA-Aa exhibits a compact structure at pH 4.0 and a more extended structure at pH 7.0. On the other hand, the conformational changes of PSMA-Aa were related to its biological response, where the higher surface-active character of the PSMA modified with l-phenylalanine correlates very well with the higher hemolytic activity observed in red blood cells, in which the surface-active capacity supports lytic potency in erythrocytes. The cytocompatibility assays indicated that there were no significant cytotoxic effects of the PSMA-Aa. Additionally, in solvent-accessible surface area studies, it was shown that the carboxylate groups of the PSMA modified with l-phenylalanine are more exposed to the solvent at pH 7.0 and high salt concentrations, which correlates with lower fluorescence intensity, reflecting a loss of mitochondrial membrane potential. It is concluded that the study of the conformational changes in PE modified with amino acids is essential for their use as biomaterials and relevant to understanding the possible effects of PE modified with amino acids in biological systems.
Assuntos
Aminoácidos , Anidridos Maleicos , Humanos , Anidridos Maleicos/química , Poliestirenos/química , Água , Fenilalanina , Hemólise , SolventesRESUMO
In this work, polyhydroxybutyrate (PHB) was maleic anhydride (MA)-grafted in the molten state, using dicumyl peroxide (DCP) as a reaction initiator. Tin(II) 2-ethylhexanoate (Sn(Oct)2) and styrene monomer (St.) were used to maximize the maleic anhydride grafting degree. When PHB was modified with MA/DCP and MA/DCP/Sn(Oct)2, viscosity was reduced, suggesting chain scission in relation to pure PHB. However, when the styrene monomer was added, the viscosity increased due to multiple grafts of MA and styrene into the PHB chain. In addition, the FTIR showed the formation of a new band at 1780 cm-1 and 704 cm-1, suggesting a multiphase copolymer PHB-g-(St-co-MA). The PHB (MA/DCP) system showed a grafting degree of 0.23%; however, the value increased to 0.39% with incorporating Sn(Oct)2. The highest grafting efficiency was for the PHB (MA/DCP/St.) system with a value of 0.91%, while the PHB (MA/DCP/St./Sn(Oct)2) hybrid mixture was reduced to 0.73%. The chemical modification process of PHB with maleic anhydride increased the thermal stability by about 20 °C compared with pure PHB. The incorporation of 0.5 phr of the Sn(Oct)2 catalyst increased the efficiency of the grafting degree in the PHB. However, the St./Sn(Oct)2 hybrid mixture caused a deleterious effect on the maleic anhydride grafting degree.
Assuntos
Anidridos Maleicos , Estireno , Polímeros , Fenômenos QuímicosRESUMO
Implantation of bone substitutes is the treatment of choice for bone defects exceeding a critical size, when self-healing becomes impossible. The use of 3D printing techniques allows the construction of scaffolds with customized properties. However, there is a lack of suitable materials for bone replacement. In this study, maleic anhydride-grafted poly (lactic acid) (MAPLA) was investigated as a potential compatibilizer agent for 3D-printed polylactic acid (PLA)/hydroxyapatite (HA) composites, in order to enhance the physicochemical and biological properties of the scaffolds. The grafting process was performed by reactive processing in a torque rheometer, with the evaluation of the use of different concentrations of maleic anhydride (MA). The success of the grafting reaction was confirmed by titration of acid groups and spectroscopic analyses, indicating the presence of succinic anhydride groups on the PLA chain. Morphological analysis of the PLA/HA 3D scaffolds, using SEM, revealed that the use of the compatibilizer resulted in a structure free from voids and holes. The compatibilization also increased the degradation process. On the other hand, TGA and DSC analyses revealed that the use of a compatibilizer had little effect on the thermal properties of the composite. Most importantly, the samples with compatibilizer were demonstrated to have a minimal cytotoxic effect on human mesenchymal stem cells (MSCs), promoting the osteogenic differentiation of these cells in a medium without the addition of classical osteogenic factors. Therefore, the grafting of PLA/HA composites improved their physicochemical and biological properties, especially the induction of MSC osteogenic differentiation, demonstrating the potential of these scaffolds for bone tissue replacement.
Assuntos
Células-Tronco Mesenquimais , Osteogênese , Humanos , Durapatita/química , Anidridos Maleicos/química , Engenharia Tecidual/métodos , Poliésteres/química , Diferenciação Celular , Alicerces Teciduais/químicaRESUMO
The synergism between thermoresponsive and bioadhesive polymers can lead to the optimization of materials with enhanced mechanical and bioadhesive properties. Quality by Design can assure the understanding and control of formulation variables. In this approach, Design of Experiment has been widely utilized as an important strategy. Poly(methyl vinyl ether-alt-maleic anhydride) (PVMMA) is a bioadhesive polymer and Pluronic F127 (PF127) shows thermoresponsiveness. The association of these two polymers has been poorly investigated. The aim of this work was to study the mechanical, bioadhesive and rheological properties of polymer mixtures composed of PVMMA and PF127, in order to select the best conditions and formulations for biomedical applications. Textural properties (hardness, compressibility, adhesiveness, cohesiveness and elasticity), softness index, bioadhesion and rheological characteristics (flow and viscoelasticity) showed that 17.5-20% (w/w) PF127-polymer mixtures displayed improved values of the parameters. However, the rheological interaction parameter showed low synergism, due to the polymers' characteristics and system organization. The formulations displayed gelation temperatures suitable for administration, with improved bioadhesive properties mainly at 34 °C and suggests the formulations can be used for biomedical applications. DoE constituted an important tool to investigate these systems showing the main effects that significantly influence the binary mixtures.
Assuntos
Anidridos Maleicos , Poloxâmero , Adesividade , Polímeros , ReologiaRESUMO
The prevalence of chronic and acute wounds, as well as the complexity of their treatment represent a great challenge for health systems around the world. In this context, the development of bioactive wound dressings that release active agents to prevent infections and promote wound healing, appears as the most promising solution. In this work, we develop an antibacterial and biocompatible wound dressing material made from coaxial electrospun fibers of poly(styrene-co-maleic anhydride) and poly(vinyl alcohol) (PSMA@PVA). The coaxial configuration of the fibers consists of a shell of poly (styrene-co-maleic anhydride) containing a variable concentration of silver nanoparticles (AgNPs) 0.1-0.6 wt% as antibacterial agent, and a core of PVA containing 1 wt% allantoin as healing agent. The fibers present diameters between 0.72 and 1.7 µm. The release of Ag+ in a physiological medium was studied for 72 h, observing a burst release during the first 14 h and then a sustained and controlled release during the remaining 58 h. Allantoin release curves showed significant release only after 14 h. The meshes showed an antibacterial activity against Pseudomonas aeruginosa and Bacillus subtilis that correlates with the amount of AgNPs incorporated and the release rate of Ag+. Indeed, meshes containing 0.3 and 0.6 wt% of AgNPs showed a 99.99% inhibition against both bacteria. The adherence and cell viability of the meshes were evaluated in mouse embryonic fibroblasts NIH/3T3, observing a significant increase in cell viability after 72 h of incubation accompanied by a reduced adhesion of fibroblasts that decreased in the presence of the active agents. These results show that the material prepared here is capable of significantly promoting fibroblast cell proliferation but without strong adherence, which makes it an ideal material for wound dressings with non-adherent characteristics and with potential for wound healing.
Assuntos
Nanopartículas Metálicas , Álcool de Polivinil , Animais , Bandagens , Proliferação de Células , Fibroblastos , Maleatos , Anidridos Maleicos , Camundongos , Poliestirenos , Prata , EstirenoRESUMO
TPS/MA/PLA is a blend of thermoplastic starch (TPS) and polylactic acid (PLA) compatibilized by maleic anhydride (MA) that can be a substitute for petro-based plastics in certain applications. At the end of its life, this material must be properly disposed in treatment systems such as composting or anaerobic digestion. The biodegradability of TPS/MA/PLA, PLA, TPS and the non-compatible mixture (TPS/PLA) was evaluated in a slurry thermophilic anaerobic digestion system (STAD) according to ISO 13975-2012 standard. The anaerobic inoculum was prepared from cow manure and the organic fraction of municipal solid waste. After 31â¯days of incubation, the pure PLA exhibited a 12-day lag phase and 40.41% of biodegradability. TPS, TPS/PLA and TPS/MA/PLA did not exhibit lag phase and reached 92.11%, 65.48% and 64.82% of biodegradation respectively. The slow degradation rate of PLA is attributed to its high glass transition temperature and crystallinity. In TPS/MA/PLA and TPS/PLA, about 50% of PLA and 13% to 10% of the TPS remains undegraded and MA did not affect the biodegradation of TPS/MA/PLA compared to TPS/PLA. Results suggest that, in very short retention times STAD systems, PLA based materials could not exhibit enough biodegradability.
Assuntos
Biodegradação Ambiental , Anidridos Maleicos/química , Poliésteres/química , Amido/química , Anaerobiose/genética , Temperatura AltaRESUMO
Polymeric materials derived from poly(maleic anhydride-alt-octadecene)-here referred as PAM-18-have shown interesting properties that make them potential pharmaceutical excipients. In this work, eight polymers derived from PAM-18 were obtained using NaOH and KOH at 1:1; 1:0.75, 1:0.5, and 1:0.25 molar ratios. The resulting products were labeled as PAM-18Na and PAM-18K, respectively. Each polymer was purified by ultrafiltration/lyophilization, and the ionization degree was determined by potentiometric studies, which was related to the zeta potential. The structural characterization was performed using the Fourier transform infrared (FT-IR) espectroscopy, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and X-ray diffraction (XRD) techniques. The physical characterization was carried out by SEM, particle analysis, and humidity loss and gain studies; the surface studies were performed by the sessile drop method. PAM-18Na had ionization degrees of 95%, 63%, 39% and 22%, whereas those for PAM-18K were 99%, 52%, 35% and 20%, respectively. The results also showed that for higher inorganic base amounts used, the polymeric materials obtained possess high ionization degrees, which could form polymeric solutions or hetero-dispersed systems. Likewise, it was observed that for higher proportions of carboxylate groups in the polymeric structure, the capability to retain water is increased and, only can be eliminated by drying at temperatures greater than 160 °C. On the other hand, the modification of PAM-18 to its ionized forms led to the formation of powder materials with low flowability and surfaces that ranged from very hydrophobic to slightly wettable.
Assuntos
Excipientes/química , Anidridos Maleicos/química , Polímeros/química , Liofilização , Interações Hidrofóbicas e Hidrofílicas , Hidróxidos/química , Tamanho da Partícula , Polimerização , Compostos de Potássio/química , Potenciometria , Pós , Hidróxido de Sódio/química , Temperatura , Ultrafiltração , MolhabilidadeRESUMO
The inflammatory condition of malignant tumors continually exposes cancer cells to reactive oxygen species, an oxidizing condition that leads to the activation of the antioxidant defense system. A similar activation occurs with glutathione production. This oxidant condition enables tumor cells to maintain the energy required for growth, proliferation, and evasion of cell death. The objective of the present study was to determine the effect on hepatocellular carcinoma cells of a combination treatment with maleic anhydride derivatives (prooxidants) and quercetin (an antioxidant). The results show that the combination of a prooxidant/antioxidant had a cytotoxic effect on HuH7 and HepG2 liver cancer cells, but not on either of two normal human epithelial cell lines or on primary hepatocytes. The combination treatment triggered apoptosis in hepatocellular carcinoma cells by activating the intrinsic pathway and causing S phase arrest during cell cycle progression. There is also clear evidence of a modification in cytoskeletal actin and nucleus morphology at 24 and 48 h posttreatment. Thus, the current data suggest that the combination of two anticarcinogenic drugs, a prooxidant followed by an antioxidant, can be further explored for antitumor potential as a new treatment strategy.
Assuntos
Carcinoma Hepatocelular/genética , Pontos de Checagem do Ciclo Celular/genética , Neoplasias Hepáticas/genética , Anidridos Maleicos/uso terapêutico , Mitocôndrias/metabolismo , Estresse Oxidativo/genética , Quercetina/uso terapêutico , Apoptose , Carcinoma Hepatocelular/patologia , Neoplasias Hepáticas/patologia , Anidridos Maleicos/farmacologia , Quercetina/farmacologiaRESUMO
Novel films of polyethylene and chitosan were obtained using extrusion. These polymers have interesting properties, and processing them with methods that are of high use in the industry, such as the extrusion method, can have a significant effect on the potential applications of these materials. The individual materials were thermally characterized; after this, extruded films of low density polyethylene and chitosan mixtures were prepared with the addition of polyethylene-graft-maleic anhydride as a compatibilizer for the blends, and glycerol, as a plasticizer for chitosan. The use of compatibilizer and plasticizer agents improved the processability and compatibility of the mixtures, as well as their mechanical properties, as revealed by mechanical property measurements and scanning electron microscopy. It was possible to prepare blends with a maximum chitosan content of 20 wt%. The material stiffness increased with the increase of chitosan in the sample. FTIR studies revealed the existence of an interaction between the compatibilizer and chitosan.
Assuntos
Materiais Biocompatíveis/química , Quitosana/química , Anidridos Maleicos/química , Polietileno/química , Teste de Materiais , Fenômenos Mecânicos , TemperaturaRESUMO
Covalently modified albumin (BSA) microparticles were developed for potential use as an adjuvant in mucosal vaccines against hepatitis B. To synthesize consistent protein particles, a covalent approach was proposed to modify BSA. Our strategy was to bond maleic anhydride (MA) molecules to BSA structure by nucleophilic reaction for further radical cross-linking/polymerization reaction with N',N'-dimethylacrylamide (DMAAm). The presence of poly(N',N'-dimethylacrylamide) in the protein network enables the microparticles to show well-defined, homogeneous forms. Cytotoxicity tests showed that the cytotoxic concentration for 50% of VERO cells (CC50) was 216.25 ± 5.30 µg mL(-1) in 72 h of incubation. The obtained CC50 value is relatively low for an incubation time of 72 h, suggesting an acceptable biocompatibility. Assay of total protein showed that the encapsulation efficiency of the microparticles with hepatitis B surface antigen (HBsAg) was 77.7 ± 0.2%. For the reference sample, which was incubated without HBsAg, the quantity of protein was below the limit of detection.