RESUMO
The urgent need for a simple and cost-effective thermochemical process to produce biochar has prompted this study. The aim was to develop a straightforward thermochemical process under O2-limited conditions for the production of coconut-based biochar (CBB) and to assess its ability to remove methylene blue (MB) through adsorption, comparing it with CBB produced by slow pyrolysis. CBBs were obtained under different atmospheric conditions (O2-limited, muffle furnace biochar (MFB); and inert, pyrolytic reactor biochar (PRB)), at 350, 500, and 700 °C, and for 30 and 90'. MFB and PRB were characterized using FTIR, RAMAN, SEM, EDS, and XRD analyses. Adsorption tests were conducted using 1.0 g L-1 of MFB and PRB, 10 mg L-1 of MB at 25 °C for 48 h. Characterization revealed that atmospheric conditions significantly influenced the yield and structural features of the materials. PRB exhibited higher yields and larger cavities than MFB, but quite similar spectral features. Adsorption tests indicated that MFB and PRB had qt values of 33.1 and 9.2 mg g-1, respectively, which were obtained at 700 °C and 90', and 700 °C and 30', respectively. This alternative method produced an innovative and promising lignocellulose-based material with great potential to be used as a biosorbent.
Assuntos
Carvão Vegetal , Cocos , Lignina , Cocos/química , Carvão Vegetal/química , Lignina/química , Adsorção , Azul de Metileno/química , TemperaturaRESUMO
The presence of pharmaceuticals in wastewater resulting from human activities has driven researchers to explore effective treatment methods such as adsorption using activated carbon (AC). While AC shows promise as an adsorbent, further studies are essential to comprehend its entire interaction with pharmaceuticals. This article investigates the adsorption of potassium diclofenac (PD) onto AC using experimental and modeling approaches. Batch adsorption studies coupled with Fourier transform infrared spectroscopy (FTIR) were employed to clarify the adsorption mechanism of PD on AC. Various kinetic and isotherm adsorption models were applied to analyze the adsorbent-adsorbate interaction. The kinetics were best described by Avrami's fractional order (AFO) nonlinear model. Also, the intraparticle diffusion (IP) model reveals a three-stage adsorption process. The experimental equilibrium data fitted well with the three-parameter nonlinear Liu model, indicating a maximum adsorption capacity (Qmax) of 88.45 mg g-1 and suggesting monolayer or multilayer adsorption. Thermodynamic analysis showed favorable adsorption (ΔG° < 0), with an enthalpy change (ΔH° = -30.85 kJ mol-1) characteristic of physisorption involving hydrogen bonds and π-π interactions. The adsorption mechanism was attributed to forming a double layer (adsorbate-adsorbent and adsorbate-adsorbate).
Assuntos
Carvão Vegetal , Diclofenaco , Poluentes Químicos da Água , Diclofenaco/química , Adsorção , Carvão Vegetal/química , Poluentes Químicos da Água/química , Cinética , Termodinâmica , Espectroscopia de Infravermelho com Transformada de Fourier , Águas Residuárias/química , Carbono/químicaRESUMO
The CH4 storage by adsorption on activated carbons for natural gas handling has gained interest due to the appearance of lightweight materials with large surface areas and pore volumes. Consequently, kinetic parameters estimation of the adsorptive process can play a crucial role in understanding and scaling up the system. Concerning its versatility, banana peel (BP) is a biomass with potential for obtaining different products, such as biochar, a solid residue from the biomass' thermal decomposition of difficult disposal, where through an activation process, the material porous features are taken advantage to application as adsorbent of gaseous substances. This research reported data for the CH4 adsorption kinetic modeling by biochar from BP pyrolysis. The activated biochar textural characterization showed particles with fine mesoporous structure (pore diameter ranging between 29.39 and 55.62 Å). Adsorption kinetic analysis indicated that a modified pseudo-first-order model was the most suitable to represent the experimental data, with equilibrium adsorption of 28 mg g-1 for the samples activated with 20.0% vol wt.-1 of H3PO4 and pyrolysis at 500 °C. The equilibrium constant was consistent with the Freundlich isotherm model, suggesting a physisorption mechanism, and led to a non-ideal, reversible, and not limited to monolayer CH4 adsorption.
Assuntos
Carvão Vegetal , Metano , Metano/química , Adsorção , Carvão Vegetal/química , Cinética , Biomassa , Musa/químicaRESUMO
Charcoal fragments preserved in soils or sediments are used by scientists to reconstruct fire histories and thereby improve our understanding of past vegetation dynamics and human-plant relationships. Unfortunately, most published methods for charcoal extraction and analysis are incompletely described and are therefore difficult to reproduce. To improve the standardization and replicability of soil charcoal analysis, as well as to facilitate accessibility for non-experts, we developed a detailed, step-by-step protocol to isolate charcoal from soil and to efficiently count and measure charcoal fragments. The extraction phase involves the chemical soaking and wet sieving of soils followed by the collection of macrocharcoal (≥500 µm). The analysis phase is performed semi-automatically using the open-source software ImageJ to count and measure the area, length, and width of fragments from light stereo microscope images by means of threshold segmentation. The protocol yields clean charcoal fragments, a set of charcoal images, and datasets containing total charcoal mass, number of fragments, and morphological measurements (area, length, and width) for each sample. We tested and validated the protocol on 339 soil samples from tropical savannas and forests in eastern lowland Bolivia. We hope that this protocol will be a valuable resource for scientists in a variety of fields who currently study, or wish to study, macroscopic charcoal in soils as a proxy for past fires.
Assuntos
Carvão Vegetal , Solo , Carvão Vegetal/química , Solo/química , Bolívia , Reprodutibilidade dos Testes , HumanosRESUMO
The present study modeled the adsorption process of the drug diclofenac sodium on activated charcoal. For this purpose, a mass balance-based model was used considering a fixed bed column. The mass transfer rate in the solid phase was represented by a driving force model proposed in this study, and a gamma exponent with a range of 0 > γ ≤ 2 was assigned to the model. Different isotherms were adopted to represent the equilibrium at the solid/liquid interface: the Langmuir, Freundlich, Sips and Redlich-Peterson isotherms. The modeling was approached from the perspective of Bayesian statistics, and the Markov chain Monte Carlo method was used for parameter estimation. Model validation was performed with experimental data obtained under different operating conditions of initial concentration ($C_{0.
Assuntos
Teorema de Bayes , Carvão Vegetal , Diclofenaco , Diclofenaco/química , Adsorção , Carvão Vegetal/química , Método de Monte Carlo , Modelos QuímicosRESUMO
Feedstock characteristics impact biochar physicochemical properties, and reproducible biochar properties are essential for any potential application. However, in most articles, feedstock aspects (i.e., taxonomic name of the species, part of the plant, and phenological phase) are scarcely reported. This research aimed at studying the effect of species and phenological stage of the feedstock on the properties of the derived biochars and, thus, adsorption capacities in water treatment. In this study, we analysed the anatomical characteristics of three different woody bamboo species [Guadua chacoensis (GC), Phyllostachys aurea (PA), and Bambusa tuldoides (BT)] in culms harvested at two different phenological phases (young and mature), and statistically correlated them with the characteristics of the six derived biochars, including their adsorption performance in aqueous media. Sclerenchyma fibres and parenchyma cells diameter and cell-wall width significantly differed among species. Additionally, sclerenchyma fibres and parenchyma cell-wall width as well as sclerenchyma fibre cell diameters are dependent on the phenological phase of the culms. Consequently, differences in biochar characteristics (i.e., yield and average pore diameter) were also observed, leading to differential methylene blue (MB) adsorption capacities between individuals at different phenological phases. MB adsorption capacities were higher for biochar produced from young culms compared to those obtained from matures ones (i.e., GC: 628.66 vs. 507.79; BT: 537.45 vs. 477.53; PA: 477.52 vs. 462.82 mg/g), which had smaller cell wall widths leading to a lower percentage of biochar yield. The feedstock anatomical properties determined biochar characteristics which modulated adsorption capacities.
Assuntos
Bambusa , Carvão Vegetal , Azul de Metileno , Carvão Vegetal/química , Azul de Metileno/química , Adsorção , Bambusa/química , Purificação da Água/métodos , Madeira/químicaRESUMO
This study assessed three powdered activated carbons (BETM, COCO, and SIAL) commercialized in Brazil at the bench scale in agitated reactors, analyzing their kinetic behavior and adsorptive capacity for BPS and BPA in ultrapure water. BETM exhibited the highest adsorption capacities (Q0max) for BPS and BPA at 260.62 and 264.64 mg/g, respectively, followed by SIAL, with a Q0max of 248.25 mg/g for BPS and for 231.20 mg/g BPA, and COCO, with a Q0max of 136.51 mg/g for BPS and 150.03 mg/g for BPA. The Langmuir isotherm model can describe the processes well. A pseudo-second-order model can describe the adsorption kinetics, and SIAL carbon had the highest rate constants (7.45 × 10-3 mg/g/min for BPS and 2.84 × 10-3 mg/g/min for BPA). The Weber-Morris intraparticle diffusion model suggests intraparticle diffusion as the rate-limiting step of all adsorption processes. Boyd's model confirmed more than the mechanism actuating in the bisphenol adsorption. The results suggest that adsorbents with basic surfaces, high specific surface areas, and high mesopore volumes tend to remove BPS and BPA efficiently. Therefore, activated carbons can effectively complement the existing treatment in Brazilian water treatment plants (WTPs).
Assuntos
Carvão Vegetal , Fenóis , Sulfonas , Poluentes Químicos da Água , Purificação da Água , Fenóis/química , Fenóis/análise , Adsorção , Brasil , Carvão Vegetal/química , Poluentes Químicos da Água/química , Poluentes Químicos da Água/análise , Sulfonas/química , Sulfonas/análise , Purificação da Água/métodos , Cinética , Compostos Benzidrílicos/química , Compostos Benzidrílicos/análiseRESUMO
The increasing water contamination by toxic heavy metals, particularly hexavalent chromium, has become a significant environmental concern. This study explores the pyrolysis of termite-processed biomass, specifically Pinus elliottii particleboard and its termite droppings (TDs), to produce biochar and its application for chromium (VI) adsorption. Termite droppings, rich in lignin, and particleboard, rich in cellulose, were pyrolyzed at various temperatures to assess the effect of biomass composition on biochar properties. The study found that lignin-rich termite droppings produced biochar with higher fixed carbon content and specific surface area than cellulose-rich particleboard biochar. FTIR and Raman spectroscopy revealed significant molecular structure changes during pyrolysis, which influenced the adsorption capabilities of the biochar. Adsorption experiments demonstrated that TD biochar exhibited significantly higher chromium (VI) adsorption capacity, attributed to its distinct chemical composition and enhanced surface properties due to higher lignin content. These findings underscore the crucial role of lignin in producing efficient biochar for heavy metal adsorption, highlighting the practical applicability of termite-processed biomass in water purification technologies.
Assuntos
Biomassa , Celulose , Carvão Vegetal , Cromo , Isópteros , Lignina , Carvão Vegetal/química , Lignina/química , Cromo/química , Animais , Celulose/química , Adsorção , Isópteros/química , Poluentes Químicos da Água/química , Pirólise , Pinus/química , Purificação da Água/métodos , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
Greywater reuse has emerged as a promising solution for addressing water shortages. However, greywater needs treatment before reuse to meet the required water quality standards. Conventional wastewater treatment technologies are unsuitable for recreating highly decentralized domestic greywater. This study evaluated bioelectrochemical reactors (BERs) with granular activated carbon (GAC) as a sustainable alternative for developing decentralized and low-cost biological treatment systems. BERs using GAC as the anode material and conventional GAC biofilters (BFs) for synthetic greywater treatment were operated in batch mode for 110 days in two stages: (i) with polarized anodes at -150 mV vs. Ag/AgCl and (ii) as a microbial fuel cell with an external resistance of 1 kΩ. Anode polarization produced an electrosorption effect, increasing the ion removal of the BERs. Power production during the operation and cyclic voltammetry tests of the extracted granules revealed electrochemically active biofilm development on the BERs. Although low power density (0.193 ± 0.052 µW m-3) was observed in BERs, they showed a similar performance in sCOD removal (BER = 91.6-89.6 %; BF = 96.2-93.2 %) and turbidity removal (BER = 81-82 %; BF = 30-62 %) to BFs that used 50 % aeration. Additionally, scanning electron microscopy of sampled granules showed higher biomass formation in BER granules than in BF granules, suggesting a higher contribution of sessile (vs. planktonic) cells to the treatment. Thus, the results highlight the synergistic removal effect of the GAC-based BER. The scalable design presented in this study represents a proof-of-concept for developing BERs to use in decentralized greywater treatment systems.
Assuntos
Reatores Biológicos , Carvão Vegetal , Purificação da Água , Carvão Vegetal/química , Purificação da Água/métodos , Fontes de Energia Bioelétrica/microbiologia , Eletrodos , Águas Residuárias , Eliminação de Resíduos Líquidos/métodos , Biofilmes , Técnicas Eletroquímicas/métodosRESUMO
Recently, biochar and N fertilizers have been used to tackle low N use efficiency (NUE) in crops across diverse environmental conditions. The coupling of biochar and N fertilizer may impact crop N utilization through different pathways in various soil types. However, there is currently a lack of comprehensive assessment of how coupling effects specifically influence N utilization in paddy and upland crops. We conducted a meta-analysis of 175 peer-reviewed studies to assess the responses of soil properties and crop traits in paddy and upland fields under coupling effects. The results indicate that NUE (+26.1 %) and N uptake (+15.0 %) in paddy fields increase more than in upland fields (+23.7 % and +8.0 %, respectively), with the coupling effect providing NH4+ predominantly for rice and NO3- for upland crops. NH4+ increases in paddy fields (+6.9 %) but decreases in upland fields (-0.7 %), while microbial biomass carbon (MBC) decreases in paddy fields (-2.9 %) and increases in upland fields (+36.0 %). These findings suggest that coupling effects supply soil inorganic nutrients in paddies and affect microbes in uplands, thereby positively affecting crop N utilization. Specifically, the greatest increase in paddy crop yield and N use efficiency occurs when the ratio of N fertilizer to biochar exceeds 1.5 %, and in uplands, it manifests when applying 10-20 t·ha-1 of biochar and <150 kg·ha-1 N fertilizer. In conclusion, this meta-analysis explores the differential effects of biochar and N fertilizer coupling in different arable land types, offering novel insights into the utilization strategies of biochar in agricultural fields.