RESUMO
The field of soft matter teems with molecules and aggregates of molecules that have internal size-modulating degrees of freedom. Proteins, peptides, microgels, polymers, micelles, and even some colloids can exist in multiple-often just two dominating-states with different effective sizes, where size can refer to the volume or to the cross-sectional area for particles residing on surfaces. The size-dependence of their accessible states renders the behavior of these particles pressure-sensitive. The Bragg-Williams model is among the most simple mean-field methods to translate the presence of inter-particle interactions into an approximate phase diagram. Here, we extend the Bragg-Williams model to account for the presence of particles that are immersed in a solvent and exist in two distinct states, one occupying a smaller and the other one a larger size. The basis of the extension is a lattice-sublattice approximation that we use to host the two size-differing states. Our model includes particle-solvent interactions that act as an effective surface tension between particles and solvent and are ignorant of the state in which the particles reside. We analyze how the energetic preference of the particles for one or the other state affects the phase diagrams. The possibility of a single phase-two phases-single phase sequence of phase transitions as a function of increasing temperature is demonstrated.
Assuntos
Coloides , Micelas , Coloides/química , Polímeros/química , Temperatura , SolventesRESUMO
Colloidal suspensions of monodisperse spherical particles have been extensively studied since one of the main advantages of these systems is their similarity to atomic ones. This property has been used successfully in basic science to understand the equilibrium and non-equilibrium behavior of model colloids and to correlate them with their atomic counterparts. In contrast, suspensions used in technological processes are usually more complex. Nevertheless, for their effective applications, it is crucial to understand their properties, such as the microstructure, dynamics, and flow behavior, as well as the mechanisms underlying their self-organization. The first step towards this knowledge is switching from monodisperse suspensions to moderately complex ones, namely binary mixtures. Therefore, the present review aims to summarize the current knowledge about the phase behavior of binary mixtures of spherical colloids with different inter-particle interactions, such as nearly hard spheres, electrostatic repulsion/attraction, depletion attraction, and attraction due to DNA hybridization. A comparison of experimental work with theoretical predictions is described for binary suspensions studied in three and two dimensions. Several open questions are outlined in the conclusions.
Assuntos
Coloides , DNA , Coloides/química , Tamanho da Partícula , SuspensõesRESUMO
In this work, monodisperse silica-coated gold nanoparticles (NPs) were synthesized and used for obtaining aqueous colloidal dispersions with an optimum relationship between colloidal stability and photothermal activity. The idea behind this design was to produce systems with the advantages of the presence of a silica shell (biocompatibility, potential for surface modification, and protecting effect) with a minimal loss of optical and thermal properties. With this aim, the photothermal properties of NPs with silica shells of different thicknesses were analyzed under conditions of high radiation extinction. By using amorphous, gel-like silica coatings, thicknesses higher than 40 nm could be obtained without an important loss of the light absorption capacity of the colloids and with a significant photothermal response even at low NP concentrations. The effects produced by changes in the solvent and in the NP concentration were also analyzed. The results show that the characteristics of the shell control both, the photothermal effect and the optical properties of the colloidal dispersions. As the presence of a silica shell strongly enhances the possibilities of adding cargo molecules or probes, these colloids can be considered of high interest for biomedical therapies, sensing applications, remote actuation, and other technological applications.
Assuntos
Nanopartículas Metálicas , Nanoconchas , Coloides/química , Ouro/química , Nanopartículas Metálicas/química , Dióxido de Silício/química , SuspensõesRESUMO
A ferrofluid with 1,2-Benzenediol-coated iron oxide nanoparticles was synthesized and physicochemically analyzed. This colloidal system was prepared following the typical co-precipitation method, and superparamagnetic nanoparticles of 13.5 nm average diameter, 34 emu/g of magnetic saturation, and 285 K of blocking temperature were obtained. Additionally, the zeta potential showed a suitable colloidal stability for cancer therapy assays and the magneto-calorimetric trails determined a high power absorption density. In addition, the oxidative capability of the ferrofluid was corroborated by performing the Fenton reaction with methylene blue (MB) dissolved in water, where the ferrofluid was suitable for producing reactive oxygen species (ROS), and surprisingly a strong degradation of MB was also observed when it was combined with H2O2. The intracellular ROS production was qualitatively corroborated using the HT-29 human cell line, by detecting the fluorescent rise induced in 2,7-dichlorofluorescein diacetate. In other experiments, cell metabolic activity was measured, and no toxicity was observed, even with concentrations of up to 4 mg/mL of magnetic nanoparticles (MNPs). When the cells were treated with magnetic hyperthermia, 80% of cells were dead at 43 °C using 3 mg/mL of MNPs and applying a magnetic field of 530 kHz with 20 kA/m amplitude.
Assuntos
Coloides/química , Coloides/farmacologia , Hipertermia Induzida/métodos , Nanopartículas Magnéticas de Óxido de Ferro/química , Espécies Reativas de Oxigênio/metabolismo , Catecóis/química , Linhagem Celular , Coloides/síntese química , Citotoxinas/síntese química , Citotoxinas/química , Citotoxinas/farmacologia , Humanos , Concentração de Íons de Hidrogênio , Magnetismo , Microscopia Eletrônica de Transmissão , Oxidantes/síntese química , Oxidantes/química , Oxidantes/farmacologia , Espectroscopia de Infravermelho com Transformada de Fourier , Temperatura , Difração de Raios XRESUMO
Tuberculosis is the top infectious disease worldwide and the development of a vaccine and diagnostic tools to control the disease is a priority that requires a better understanding of the factors involved in the pathogenesis of Mycobacterium tuberculosis, the infectious agent. It is known that bacterial cell surface components are released, interact with immune cell receptors, and may traffic toward host cell structures. Many of these compounds are lipids that have been associated with mycobacterial virulence. However, their hydrophobic nature has frequently hampered their biological study. In this work, silica particles were coated with functional lipids to obtain a colloidal bioinspired system based on nonhydrosoluble glycolipids. Mycobacterium tuberculosis phosphatidylinositol mannosides (PIMs), known to interact with receptors of innate immune cells, were purified from the M. tuberculosis H37Rv type strain, and used to prepare large unilamellar liposomes in combination with zwitterionic phosphatidyl choline. Then, bacillary-like Santa Barbara Amorphous-15 (SBA-15) silica particles were cationized and the vesicle fusion method was used to promote the attachment of anionic PIM-containing lipid bilayers. Thermogravimetric analysis, x-ray diffraction, N2 adsorption-desorption isotherm analysis, Fourier transform infrared spectroscopy, electron microscopy, and zeta potential analyses were used to characterize the materials obtained. The as-prepared PIM-containing colloids, named PIM@SBA-15, showed biocompatibility toward human fibroblasts and were found to colocalize with Toll-like receptor (TLR)2 upon their incubation with THP1-derived macrophages. Furthermore, the particles induced the formation of pseudopods and were internalized into phagocytic cells. In all, these data suggest the usefulness of PIM@SBA-15 particles to better comprehend the interactions between immune cells and PIMs.
Assuntos
Coloides/química , Fosfatidilinositóis/química , Dióxido de Silício/química , Materiais Biocompatíveis/química , Materiais Biocompatíveis/metabolismo , Materiais Biocompatíveis/farmacologia , Linhagem Celular , Sobrevivência Celular/efeitos dos fármacos , Humanos , Macrófagos/citologia , Macrófagos/imunologia , Macrófagos/metabolismo , Mycobacterium tuberculosis/metabolismo , Fagocitose/efeitos dos fármacos , Fosfatidilinositóis/metabolismo , Porosidade , Tuberculose/metabolismo , Tuberculose/microbiologia , Tuberculose/patologia , Lipossomas Unilamelares/químicaRESUMO
AIMS: To use an agroindustrial waste (orange peels) as a source of polyphenols as a reducing medium for obtaining silver nanoparticles by greener method. BACKGROUND: Several techniques have been employed for AgNPs synthesis, nevertheless, most of them involve the use of toxic chemicals in the process. The use of fungi, bacteria, and plant extracts as subtracts for green synthesis is an ecofriendly alternative, although hypothetic, route for AgNPs large scale synthesis. In the case of plant extracts, it is believed that polyphenols are the biomolecules responsible for the reduction and stabilization of the Ag+ ions into AgNPs, being a sustainable and ecological option; polyphenols could be obtained from plant waste and agroindustrial subproducts. OBJECTIVE: To develop an efficient, greener, and low-cost method of AgNPs production using natural products. METHODS: The basic principle of silver nanoparticles synthesis is the interaction in a mixture of silver nitrate (source of Ag+ ions) and the orange peel extract (reducing and stabilizing agent) under certain conditions. Five treatments were carried out, evaluating several parameters during AgNPs synthesis such as pH, orange peel extract-silver nitrate ratio, time and conditions of incubation, irradiation of UV light, irradiation of microwave, and temperature. RESULT: The synthesis of silver nanoparticles from an agroindustrial waste as the orange peel was successfully carried out and checked by visual evaluation, UV-Vis spectroscopy, and EDS analysis. The particle size was estimated between 42.82 nm to 151.75 nm, having a spherical and ovoid morphology. DISCUSSION: Through the analysis of several synthesis conditions, it has become possible to establish a suitable treatment to increase antibacterial yield and evaluate morphology and size traits in order to acquire the best conditions for a future industrial scale synthesis. CONCLUSION: The orange peel aqueous extract resulted as a great source of polyphenols, allowing the successful synthesis of silver nanoparticles in mild conditions. Thus, obtained AgNPs revealed an increased antibacterial effect and potential against Gram-positive bacteria such as Staphyloccocus aureus.
Assuntos
Antibacterianos/farmacologia , Citrus sinensis/química , Química Verde , Nanopartículas Metálicas/química , Prata/farmacologia , Coloides/química , Bactérias Gram-Positivas/efeitos dos fármacos , Nanopartículas Metálicas/ultraestrutura , Testes de Sensibilidade Microbiana , Soluções , Espectrometria por Raios X , Espectrofotometria Ultravioleta , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
The use of noble metal nanoparticles in biomedical and biotechnological applications is nowadays well established. Particularly, silver nanoparticles (AgNPs) were proven to be effective for instance as a biocide agent. They also find applications in tumor therapies and sensing applications being encouraging tools for in-vivo imaging. In this framework, whenever they are in contact with living systems, they are rapidly coated by a protein corona thereby influencing a variety of biological events including cellular uptake, blood circulation lifetime, cytotoxicity and, ultimately, the therapeutic effect. Taking these considerations into account, we have explored the behavior of polymer-coated AgNPs in model protein environments focusing on the self-development of protein coronas. The polymers polyethyleneimine (PEI), polyvinylpyrrolidone (PVP) and poly(2-vinyl pyridine)-b-poly(ethylene oxide) (PEO-b-P2VP) were used as stabilizing agents. The chemical nature of the polymer capping remarkably influences the behavior of the hybrid nanomaterials in protein environments. The PEO-b-P2VP and PVP-stabilized AgNPs are essentially inert to the model proteins adsorption. On the other hand, the PEI-stabilized AgNPs interact strongly with bovine serum albumin (BSA). Nevertheless, the same silver colloids were evidenced to be stable in IgG and lysozyme environments. The BSA adsorption into the PEI-stabilized AgNPs is most probably driven by hydrogen bonding and van der Waals interactions as suggested by isothermal titration calorimetry data. The development of protein coronas around the AgNPs may have relevant implications in a variety of biological events. Therefore, further investigations are currently underway to evaluate the influence of its presence on the cytotoxicity, hemolytic effects and biocide properties of the produced hybrid nanomaterials.
Assuntos
Coloides/química , Polímeros/química , Coroa de Proteína/química , Soroalbumina Bovina/química , Prata/química , Adsorção , Animais , Calorimetria , Bovinos , Galinhas , Difusão Dinâmica da Luz , Nanopartículas/ultraestrutura , Polietilenoimina/química , Povidona/química , Espectrometria de Fluorescência , Espectrofotometria UltravioletaRESUMO
BACKGROUND: The incorporation of hydrocolloids into starch dispersions modifies their techno-functional properties, such as gelatinization, retrogradation, syneresis, and texture, among others. Their main function is to improve these properties and to promote greater stability of starch gels. Thus, the main objective of this study was to evaluate the effect of adding colloids (guar gum and xanthan gum) on the texture properties (hardness, elasticity, cohesiveness, and gumminess) and syneresis of the starch gels made from the common variety of arrowroot. Analysis of variance (ANOVA) and regression were carried out to analyze the effects of the treatments and variables with their respective interactions. RESULTS: The addition of guar gum and xanthan gum influenced the stability of the starch gels studied, and it was capable of reducing syneresis even at low concentrations, with a greater effect for xanthan gum. Both gums were capable of inhibiting syneresis at concentrations above 0.5%, throughout the storage time studied (5 days). The addition of these hydrocolloids was also shown to influence the following texture parameters: hardness, cohesiveness, and gumminess, but showed no effect on gel elasticity. CONCLUSION: The addition of hydrocolloids was shown to be an alternative way of increasing the stability and enhancing the textural properties of the starch gels in arrowroot. © 2020 Society of Chemical Industry.
Assuntos
Galactanos/química , Mananas/química , Marantaceae/química , Extratos Vegetais/química , Gomas Vegetais/química , Polissacarídeos Bacterianos/química , Amido/química , Coloides/química , Elasticidade , Géis/química , Dureza , ReologiaRESUMO
BACKGROUND: The biodegradable and biocompatible nature of pectin-based films is of particular interest in wound dressing applications, due to its non-toxicity, pH-sensitivity and gelling activity. An approach to improve the mechanical properties, the release profile of bioactive compounds as well as the performance in wet environments of pectin-based films is mixing with other biopolymers. OBJECTIVE: To prepare hydrocolloid films based on crosslinked pectin / starch blend loaded with bioactive extracts from leaves of G. tinctoria and U. molinae with controlled release of bioactive compounds and healing property. METHODS: The hydrocolloid films were characterized by FTIR, SEM, and TGA-FTIR techniques and their tensile properties, water uptake, and polyphenolic release profile in aqueous media were evaluated. The dermal anti inflammatory activity of the hydrocolloid films was assessed by the mouse ear inflammation test. The wound healing property of the loaded hydrocolloid films was explored in a rat model and in a clinical trial (sacrum pressure ulcer). RESULTS: The films showed an adequate water-uptake capacity between 100-160%. The release of active compounds from the hydrocolloid films followed the Korsmeyer-Peppas equation. The mechanical properties of hydrocolloid films were not affected by the plant extracts within the concentration range used. The incorporation of the bioactive extracts in the polysaccharide films inhibited the topical edematous response by about 50%. The topical application of the loaded hydrocolloid film on the pressure ulcer is completely closed after 17 days without showing any adverse reaction. CONCLUSION: A novel hydrocolloid matrix was produced from crosslinked starch-pectin, which exhibited suitable chemical-physical properties to be used as a carrier of plant extracts with wound healing properties.
Assuntos
Anti-Inflamatórios/farmacologia , Reagentes de Ligações Cruzadas/farmacologia , Pectinas/farmacologia , Extratos Vegetais/farmacologia , Úlcera por Pressão/tratamento farmacológico , Amido/farmacologia , Cicatrização/efeitos dos fármacos , Idoso , Animais , Anti-Inflamatórios/química , Bandagens , Coloides/química , Coloides/farmacologia , Reagentes de Ligações Cruzadas/química , Feminino , Humanos , Magnoliopsida/química , Masculino , Camundongos , Camundongos Endogâmicos , Myrtaceae/química , Pectinas/química , Extratos Vegetais/química , Folhas de Planta/química , Úlcera por Pressão/patologia , Ratos , Ratos Sprague-Dawley , Amido/químicaRESUMO
Colloidal Liquid Aphrons (CLAs) are micron sized discrete spherical solvent droplets formed by the dispersion of polyaphrons into a bulk aqueous phase at a low phase volume ratio where they can be kept homogenously suspended with only minimal agitation. CLAs have high stability due to the presence of a surfactant 'shell' surrounding the solvent core, and possess large surface areas per unit volume for mass transfer due to their small size. Therefore, CLAs are well suited for applications in pre-dispersed solvent extraction (PSE), enzyme immobilization, and have the potential to be used as a drug delivery system. Using PSE, CLAs have been used to remove metals such as Ni2+, Cu2+, Fe3+, Cr3+ and Mg2+ from dilute streams, separate organic dyes such as Yellow 1 from wastewater, extract succinic and lactic acid, reactively extract phenylalanine, and separate suspensions. CLAs have also been used to immobilize enzymes such as lipase, lysozyme and albumins with cases of superactivity being reported due to the influence of surfactant and solvent interactions with the enzyme. Furthermore, due to their similarity to current drug delivery systems such as microemulsions and hydrogels, and other advantages, CLA systems have the potential to be adapted for drug delivery systems also. This article provides a complete list of the current applications of Colloidal Liquid Aphrons (CLAs) in PSE and enzyme immobilization, and also presents insight into how CLAs can be utilized as a drug delivery method in the future. Finally, this review ends by summarizing potentially interesting research areas to pursue in this field.