RESUMO
In disease treatment, maintaining therapeutic drug concentrations often requires multiple doses. Lipid/polymer hybrid nanoparticles (LPHNPs) offer a promising solution by facilitating sustained drug delivery within therapeutic ranges. Here, we synthesized poly(lactic-co-glycolic acid) (PLGA) nanoparticles coated with soy lecithin using nanoprecipitation and self-assembly techniques. These nanoparticles were incorporated into gelatin aerogels to ensure uniform distribution and increase the concentration. Our study focused on understanding the release kinetics of hydrophilic (gallic acid) and lipophilic (quercetin) compounds from this system. Nanoparticles exhibited hydrodynamic diameters of 100 ± 15 nm (empty), 153 ± 33 nm (gallic acid-loaded), and 149 ± 21 nm (quercetin-loaded), with encapsulation efficiencies of 90 ± 5% and 70 ± 10% respectively. Gallic acid release followed the Korsmeyer-Peppas kinetics model (n = 1.01), while quercetin showed first-order kinetics. Notably, encapsulated compounds demonstrated delayed release compared to free compounds in gelatin aerogels, illustrating LPHNPs' ability to modulate release profiles independent of the compound type. This study underscores the potential of LPHNPs in optimizing drug delivery strategies for enhanced therapeutic outcomes.
Assuntos
Ácido Gálico , Interações Hidrofóbicas e Hidrofílicas , Nanopartículas , Copolímero de Ácido Poliláctico e Ácido Poliglicólico , Quercetina , Quercetina/química , Nanopartículas/química , Ácido Gálico/química , Cinética , Copolímero de Ácido Poliláctico e Ácido Poliglicólico/química , Lecitinas/química , Gelatina/química , Ácido Láctico/química , Ácido Poliglicólico/química , Liberação Controlada de Fármacos , Lipídeos/química , Portadores de Fármacos/química , Tamanho da PartículaRESUMO
Scaffolds for the filling and regeneration of osteochondral defects are a current challenge in the biomaterials field, and solutions with greater functionality are still being sought. The novel approach of this work was to obtain scaffolds with biologically active additives possessing microstructural, permeability, and mechanical properties, mimicking the complexity of natural cartilage. Four types of scaffolds with a gelatin/alginate matrix modified with hydroxyapatite were obtained, and the relationship between the modifiers and substrate properties was evaluated. They differed in the type of second modifier used, which was hydrated MgCl2 in two proportions, ZnO, and nanohydroxyapatite. The samples were obtained by freeze-drying by using two-stage freezing. Based on microstructural observations combined with X-ray microanalysis, the microstructure of the samples and the elemental content were assessed. Permeability and mechanical tests were also performed. The scaffolds exhibited a network of interconnected pores and complex microarchitecture, with lower porosity at the surface (15 ± 7 to 29 ± 6%) and higher porosity at the center (67 ± 8 to 75 ± 8%). The additives had varying effects on the pore sizes and permeabilities of the samples. ZnO yielded the most permeable scaffolds (5.92 × 10-11 m2), whereas nanohydroxyapatite yielded the scaffold with the lowest permeability (1.18 × 10-11 m2), values within the range reported for trabecular bone. The magnesium content had no statistically significant effect on the permeability. The best mechanical parameters were obtained for ZnO samples and those containing hydrated MgCl2. The scaffold's properties meet the criteria for filling osteochondral defects. The developed scaffolds follow a biomimetic approach in terms of hierarchical microarchitecture and mechanical parameters as well as chemical composition. The obtained composite materials have the potential as biomimetic scaffolds for the regeneration of osteochondral defects.
Assuntos
Hidrogéis , Cloreto de Magnésio , Alicerces Teciduais , Óxido de Zinco , Óxido de Zinco/química , Alicerces Teciduais/química , Cloreto de Magnésio/química , Hidrogéis/química , Porosidade , Alginatos/química , Durapatita/química , Permeabilidade , Gelatina/química , Teste de MateriaisRESUMO
BACKGROUND: Polymeric electrospun mats have been used as scaffolds in tissue engineering for the development of novel materials due to its characteristics. The usage of synthetic materials has gone in decline due to environmental problems associated with their synthesis and waste disposal. Biomaterials such as biopolymers have been used recently due to good compatibility on biological applications and sustainability. OBJECTIVE: The purpose of this work is to obtain novel materials based on synthetic and natural polymers for applications on tissue engineering. METHODS: Aloe vera mucilage was obtained, chemically characterized, and used as an active compound contained in electrospun mats. Polymeric scaffolds were obtained in single, coaxial and tri-layer structures, characterized and evaluated in cell culture. RESULTS: Mucilage loaded electrospun fibers showed good compatibility due to formation of hydrogen bonds between polymers and biomolecules from its structure, evidenced by FTIR spectra and thermal properties. Cell viability test showed that most of the obtained mats result on viability higher than 75%, resulting in nontoxic materials, ready to be used on scaffolding applications. CONCLUSION: Mucilage containing fibers resulted on materials with potential use on scaffolding applications due to their mechanical performance and cell viability results.
Assuntos
Aloe , Sobrevivência Celular , Gelatina , Mucilagem Vegetal , Poliésteres , Engenharia Tecidual , Alicerces Teciduais , Poliésteres/química , Engenharia Tecidual/métodos , Gelatina/química , Alicerces Teciduais/química , Sobrevivência Celular/efeitos dos fármacos , Aloe/química , Mucilagem Vegetal/química , Materiais Biocompatíveis/química , Materiais Biocompatíveis/farmacologia , Teste de Materiais , Humanos , Membranas Artificiais , AnimaisRESUMO
Background: Desserts with vegetable ingredients are a constantly expanding global market due to the search for alternatives to cow's milk. Fermentation of these matrices by lactic acid bacteria can add greater functionality to the product, improving its nutritional, sensory, and food safety characteristics, as well as creating bioactive components with beneficial effects on health. Concern for health and well-being has aroused interest in byproducts of the industry that have functional properties for the body, such as mature coconut water, a normally discarded residue that is rich in nutrients. This study aimed to develop a probiotic gelatin based on pulp and water from mature coconuts and evaluate the physicochemical characteristics, viability of the Lacticaseibacillus rhamnosus LR32 strain in the medium, as well as the texture properties of the product. Methods: After collection and cleaning, the physicochemical characterization, mineral analysis, analysis of the total phenolic content and antioxidant activity of mature coconut water were carried out, as well as the centesimal composition of its pulp. Afterwards, the gelling was developed with the addition of modified corn starch, gelatin, sucrose, and probiotic culture, being subjected to acidity analysis, texture profile and cell count, on the first day and every 7 days during 21 days of storage, under refrigeration at 5 °C. An analysis of the centesimal composition was also carried out. Results: The main minerals in coconut water were potassium (1,932.57 mg L-1), sodium (19.57 mg L-1), magnesium (85.13 mg L-1) calcium (279.93 mg L-1) and phosphorus (11.17 mg L- 1), while the pulp had potassium (35.96 g kg-1), sodium (0.97 g kg-1), magnesium (2.18 g kg-1), 37 calcium (1.64 g kg-1), and phosphorus (3.32 g kg-1). The phenolic content of the water and pulp was 5.72 and 9.77 mg gallic acid equivalent (GAE) 100 g-1, respectively, and the antioxidant capacity was 1.67 and 0.98 39 g of 2, 2-diphenyl-1-picrylhydrazyl (DPPH) mg-1, respectively. The coconut pulp had 2.81 g 100 g-1of protein, 1.11 g 100 g-1 of 40 ash, 53% moisture, and 5.81 g 100 g-1 of carbohydrates. The gelatin produced during the storage period presented firmness parameters ranging from 145.82 to 206.81 grams-force (gf), adhesiveness from 692.85 to 1,028.63 gf sec, cohesiveness from 0.604 to 0.473, elasticity from 0.901 to 0.881, gumminess from 86.27 to 97.87 gf, and chewiness from 77.72 to 91.98 gf. Regarding the viability of the probiotic microorganism, the dessert had 7.49 log CFU g-1 that remained viable during the 21-day storage, reaching 8.51 CFU g-1. Acidity ranged from 0.15 to 0.64 g of lactic acid 100 g-1. The centesimal composition of the product showed 4.88 g 100 g-1 of protein, 0.54 g 100 g-1 of ash, 85.21% moisture, and 5.37g 100 g-1 of carbohydrates. The development of the gelatin made it possible to obtain a differentiated product, contributing to diversification in the food sector, providing a viable alternative for maintaining consumer health and reducing costs compared to desserts already available on the market.
Assuntos
Cocos , Gelatina , Lacticaseibacillus rhamnosus , Probióticos , Cocos/química , Cocos/microbiologia , Gelatina/química , Antioxidantes/farmacologia , Antioxidantes/química , FermentaçãoRESUMO
Tumor-on-chips (ToCs) are useful platforms for studying the physiology of tumors and evaluating the efficacy and toxicity of anti-cancer drugs. However, the design and fabrication of a ToC system is not a trivial venture. We introduce a user-friendly, flexible, 3D-printed microfluidic device that can be used to culture cancer cells or cancer-derived spheroids embedded in hydrogels under well-controlled environments. The system consists of two lateral flow compartments (left and right sides), each with two inlets and two outlets to deliver cell culture media as continuous liquid streams. The central compartment was designed to host a hydrogel in which cells and microtissues can be confined and cultured. We performed tracer experiments with colored inks and 40 kDa fluorescein isothiocyanate dextran to characterize the transport/mixing performances of the system. We also cultured homotypic (MCF7) and heterotypic (MCF7-BJ) spheroids embedded in gelatin methacryloyl hydrogels to illustrate the use of this microfluidic device in sustaining long-term micro-tissue culture experiments. We further demonstrated the use of this platform in anticancer drug testing by continuous perfusion of doxorubicin, a commonly used anti-cancer drug for breast cancer. In these experiments, we evaluated drug transport, viability, glucose consumption, cell death (apoptosis), and cytotoxicity. In summary, we introduce a robust and friendly ToC system capable of recapitulating relevant aspects of the tumor microenvironment for the study of cancer physiology, anti-cancer drug transport, efficacy, and safety. We anticipate that this flexible 3D-printed microfluidic device may facilitate cancer research and the development and screening of strategies for personalized medicine.
Assuntos
Antineoplásicos , Neoplasias da Mama , Impressão Tridimensional , Esferoides Celulares , Humanos , Esferoides Celulares/efeitos dos fármacos , Esferoides Celulares/patologia , Esferoides Celulares/metabolismo , Neoplasias da Mama/tratamento farmacológico , Neoplasias da Mama/patologia , Neoplasias da Mama/metabolismo , Antineoplásicos/farmacologia , Antineoplásicos/química , Feminino , Células MCF-7 , Hidrogéis/química , Dispositivos Lab-On-A-Chip , Linhagem Celular Tumoral , Ensaios de Seleção de Medicamentos Antitumorais , Dextranos/química , Gelatina/química , Doxorrubicina/farmacologia , Doxorrubicina/química , Sobrevivência Celular/efeitos dos fármacos , MetacrilatosRESUMO
Bone tissue regeneration strategies have incorporated the use of natural polymers, such as hydroxyapatite (nHA), chitosan (CH), gelatin (GEL), or alginate (ALG). Additionally, platelet concentrates, such as platelet-rich fibrin (PRF) have been suggested to improve scaffold biocompatibility. This study aimed to develop scaffolds composed of nHA, GEL, and CH, with or without ALG and lyophilized PRF, to evaluate the scaffold's properties, growth factor release, and dental pulp stem cells (DPSC), and osteoblast (OB) derived from DPSC viability. Four scaffold variations were synthesized and lyophilized. Then, degradation, swelling profiles, and morphological analysis were performed. Furthermore, PDGF-BB and FGF-B growth factors release were quantified by ELISA, and cytotoxicity and cell viability were evaluated. The swelling and degradation profiles were similar in all scaffolds, with pore sizes ranging between 100 and 250 µm. FGF-B and PDGF-BB release was evidenced after 24 h of scaffold immersion in cell culture medium. DPSC and OB-DPSC viability was notably increased in PRF-supplemented scaffolds. The nHA-CH-GEL-PRF scaffold demonstrated optimal physical-biological characteristics for stimulating DPSC and OB-DPSC cell viability. These results suggest lyophilized PRF improves scaffold biocompatibility for bone tissue regeneration purposes.
Assuntos
Alginatos , Sobrevivência Celular , Quitosana , Polpa Dentária , Durapatita , Gelatina , Osteoblastos , Fibrina Rica em Plaquetas , Células-Tronco , Alicerces Teciduais , Humanos , Polpa Dentária/citologia , Quitosana/química , Quitosana/farmacologia , Gelatina/química , Fibrina Rica em Plaquetas/química , Fibrina Rica em Plaquetas/metabolismo , Alicerces Teciduais/química , Células-Tronco/efeitos dos fármacos , Células-Tronco/citologia , Células-Tronco/metabolismo , Sobrevivência Celular/efeitos dos fármacos , Durapatita/química , Durapatita/farmacologia , Alginatos/química , Alginatos/farmacologia , Osteoblastos/efeitos dos fármacos , Osteoblastos/citologia , Adesão Celular/efeitos dos fármacos , Engenharia Tecidual/métodos , Células CultivadasRESUMO
The difficulty in swallowing is a frequent problem when oral solid dosage forms (conventional tablets or capsules) are administered to paediatric population or patients with dysphagia. An interesting alternative to overcome these problems are non-conventional formulations like chewable gels, commonly known as 'gummies'. Therefore, this work addresses the design, development and characterization of gummies using gelatine and pectin, for the vehiculization of the antiarrhythmic amiodarone (AMIO). Applying a Design of Experiments (DoE) approach, four gelatine (GG1-GG4) and eight pectin formulations (PG1-PG8) were developed. Considering the obtained results for responses during DoE evaluation (i.e., volume, syneresis, hardness, and gumminess), GG3 and PG8 were selected for complete characterization. Water activity, pH, drug content, texture parameters (adhesiveness, springiness, cohesiveness, and fracturability), disintegration time, in vitro dissolution, and microbiological features were evaluated. The obtained results were within the expected values for this type of formulation. The dissolution profiles showed a 94 % - 99 % of the AMIO content released for GG3 and PG8, respectively, so they could be considered suitable as immediate release dosage forms. In conclusion, the chewable gels were successfully developed and characterised, suggesting a potential means to accomplish a final prototype for the improvement of congenital cardiopathies treatment.
Assuntos
Amiodarona , Antiarrítmicos , Géis , Cardiopatias Congênitas , Pectinas , Amiodarona/administração & dosagem , Amiodarona/química , Humanos , Pectinas/química , Antiarrítmicos/administração & dosagem , Antiarrítmicos/química , Cardiopatias Congênitas/tratamento farmacológico , Gelatina/química , Animais , Criança , Administração Oral , Liberação Controlada de Fármacos , Composição de Medicamentos/métodos , Solubilidade , Química Farmacêutica/métodosRESUMO
Biomaterial scaffolds play a pivotal role in the advancement of cultured meat technology, facilitating essential processes like cell attachment, growth, specialization, and alignment. Currently, there exists limited knowledge concerning the creation of consumable scaffolds tailored for cultured meat applications. This investigation aimed to produce edible scaffolds featuring both smooth and patterned surfaces, utilizing biomaterials such as salmon gelatin, alginate, agarose and glycerol, pertinent to cultured meat and adhering to food safety protocols. The primary objective of this research was to uncover variations in transcriptomes profiles between flat and microstructured edible scaffolds fabricated from marine-derived biopolymers, leveraging high-throughput sequencing techniques. Expression analysis revealed noteworthy disparities in transcriptome profiles when comparing the flat and microstructured scaffold configurations against a control condition. Employing gene functional enrichment analysis for the microstructured versus flat scaffold conditions yielded substantial enrichment ratios, highlighting pertinent gene modules linked to the development of skeletal muscle. Notable functional aspects included filament sliding, muscle contraction, and the organization of sarcomeres. By shedding light on these intricate processes, this study offers insights into the fundamental mechanisms underpinning the generation of muscle-specific cultured meat.
Assuntos
Diferenciação Celular , Carne in vitro , Alicerces Teciduais , Transcriptoma , Animais , Alginatos/química , Materiais Biocompatíveis/química , Biopolímeros , Gelatina/química , Perfilação da Expressão Gênica , Células Musculares/metabolismo , Desenvolvimento Muscular/genética , Salmão , Sefarose/química , Alicerces Teciduais/químicaRESUMO
The necessity of animal-free performance tests for novel ophthalmic formulation screening is challenging. For this, we developed and validated a new device to simulate the dynamics and physical-chemical barriers of the eye for in vitro performance tests of topic ophthalmic formulations. The OphthalMimic is a 3D-printed device with an artificial lacrimal flow, a cul-de-sac area, a support base, and a simulated cornea comprised of a polymeric membrane containing poly-vinyl alcohol 10 % (w/v), gelatin 2.5 % (w/v), and different proportions of mucin and poloxamer, i.e., 1:1 (M1), 1:2 (M2), and 2:1 (M3) w/v, respectively. The support base is designed to move between 0° and 50° to replicate the movement of an eyelid. We challenged the model by testing the residence performance of poloxamer®407 16 % and poloxamer®407 16 % + chitosan 1 % (PLX16CS10) gels containing fluconazole. The test was conducted with a simulated tear flow of 1.0 mL.min-1 for 5 min. The OphthalMimic successfully distinguished PLX16 and PLX16C10 formulations based on their fluconazole drainage (M1: 65 ± 14 % and 27 ± 10 %; M2: 58 ± 6 % and 38 ± 9 %; M3: 56 ± 5 % and 38 ± 18 %). In conclusion, the OphthalMimic is a promising tool for comparing the animal-free performance of ophthalmic formulations.
Assuntos
Soluções Oftálmicas , Poloxâmero , Poloxâmero/química , Soluções Oftálmicas/química , Administração Oftálmica , Fluconazol/administração & dosagem , Impressão Tridimensional , Córnea/efeitos dos fármacos , Córnea/metabolismo , Animais , Quitosana/química , Alternativas aos Testes com Animais/métodos , Lágrimas/química , Humanos , Gelatina/químicaRESUMO
3D-printed hydrogel scaffolds biomimicking the extracellular matrix (ECM) are key in cartilage tissue engineering as they can enhance the chondrogenic differentiation of mesenchymal stem cells (MSCs) through the presence of active nanoparticles such as graphene oxide (GO). Here, biomimetic hydrogels were developed by cross-linking alginate, gelatin, and chondroitin sulfate biopolymers in the presence of GO as a bioactive filler, with excellent processability for developing bioactive 3D printed scaffolds and for the bioprinting process. A novel bioink based on our hydrogel with embedded human MSCs presented a cell survival rate near 100% after the 3D bioprinting process. The effects of processing and filler concentration on cell differentiation were further quantitatively evaluated. The nanocomposited hydrogels render high MSC proliferation and viability, exhibiting intrinsic chondroinductive capacity without any exogenous factor when used to print scaffolds or bioprint constructs. The bioactivity depended on the GO concentration, with the best performance at 0.1 mg mL-1. These results were explained by the rational combination of the three biopolymers, with GO nanoparticles having carboxylate and sulfate groups in their structures, therefore, biomimicking the highly negatively charged ECM of cartilage. The bioactivity of this biomaterial and its good processability for 3D printing scaffolds and 3D bioprinting techniques open up a new approach to developing novel biomimetic materials for cartilage repair.