RESUMO
The hydrothermal pretreatment process stands out as a pivotal step in breaking down the hemicellulosic fraction of lignocellulosic biomasses, such as sugarcane bagasse and eucalyptus sawdust. This pretreatment step is crucial for preparing these materials for subsequent processes, particularly in food applications. This technique aims to disintegrate plant wall components like cellulose, hemicellulose, and lignin, and facilitating access in later phases such as enzymatic hydrolysis, and ultimately making fermentable sugars available. In this study, sugarcane bagasse and eucalyptus sawdust biomass underwent hydrothermal pretreatment at specific conditions, yielding two key components: dry biomass and hemicellulose liquor. The primary focus was to assess the impact of hydrothermal pretreatment followed by enzymatic hydrolysis, using the Celic Ctec III enzyme cocktail, to obtain fermentable sugars. These sugars were then transformed into membranes via strain Gluconacetobacter xylinus bacterial biosynthesis. Notably, the addition of a nitrogen source significantly boosted production to 14.76 g/ in hydrolyzed sugarcane bagasse, underscoring its vital role in bacterial metabolism. Conversely, in hydrolyzed eucalyptus, nitrogen source inclusion unexpectedly decreased yield, highlighting the intricate interactions in fermentation media and the pivotal influence of nitrogen supplementation. Characterization of membranes obtained in synthetic and hydrolyzed media through techniques such as FEG-SEM, FTIR, and TGA, followed by mass balance assessment, gauged their viability on an industrial scale. This comprehensive study aimed not only to understand the effects of pretreatment and enzymatic hydrolysis but to also evaluate the applicability and sustainability of the process on a large scale, providing crucial insights into its feasibility and efficiency in practical food-related scenarios, utilizing nanocellulose bacterial (BNC) as a key component.
Assuntos
Biomassa , Celulose , Eucalyptus , Lignina , Saccharum , Lignina/química , Lignina/metabolismo , Celulose/química , Celulose/metabolismo , Hidrólise , Eucalyptus/química , Saccharum/química , Fermentação , Gluconacetobacter xylinus/metabolismo , Polissacarídeos/química , Polissacarídeos/metabolismoRESUMO
In this study, lignin derived from corncobs was chemically modified by substituting the hydroxyl groups present in its structure with methacrylate groups through a catalytic reaction using methacrylic anhydride, resulting in methacrylated lignin (ML). These MLs were incorporated in polymerization reaction of the monomer 2-[(acryloyloxy)ethyl trimethylammonium] chloride (Cl-AETA) and Cl-AETA, Cl-AETA/ML polymers were obtained, characterized (spectroscopic, thermal and microscopic analysis), and evaluated for removing Cr (VI) and As (V) from aqueous media in function of pH, contact time, initial metal concentrations and adsorbent amount. The Cl-AETA/ML polymers followed the Langmuir adsorption model for the evaluated metal anions and were able to remove up to 91 % of Cr (VI) with a qmax (maximum adsorption capacity) of 201 mg/g, while for As (V), up to 60 % could be removed with a qmax of 58 mg/g. The results demonstrate that simple modifications in lignin enhance its functionalization and properties, making it suitable for removing contaminants from aqueous media, showing promising results for potential future applications.
Assuntos
Cromo , Lignina , Poluentes Químicos da Água , Lignina/química , Cromo/química , Cromo/isolamento & purificação , Adsorção , Poluentes Químicos da Água/química , Poluentes Químicos da Água/isolamento & purificação , Purificação da Água/métodos , Polímeros/química , Polímeros/síntese química , Água/química , Concentração de Íons de Hidrogênio , PolimerizaçãoRESUMO
The urgent need for a simple and cost-effective thermochemical process to produce biochar has prompted this study. The aim was to develop a straightforward thermochemical process under O2-limited conditions for the production of coconut-based biochar (CBB) and to assess its ability to remove methylene blue (MB) through adsorption, comparing it with CBB produced by slow pyrolysis. CBBs were obtained under different atmospheric conditions (O2-limited, muffle furnace biochar (MFB); and inert, pyrolytic reactor biochar (PRB)), at 350, 500, and 700 °C, and for 30 and 90'. MFB and PRB were characterized using FTIR, RAMAN, SEM, EDS, and XRD analyses. Adsorption tests were conducted using 1.0 g L-1 of MFB and PRB, 10 mg L-1 of MB at 25 °C for 48 h. Characterization revealed that atmospheric conditions significantly influenced the yield and structural features of the materials. PRB exhibited higher yields and larger cavities than MFB, but quite similar spectral features. Adsorption tests indicated that MFB and PRB had qt values of 33.1 and 9.2 mg g-1, respectively, which were obtained at 700 °C and 90', and 700 °C and 30', respectively. This alternative method produced an innovative and promising lignocellulose-based material with great potential to be used as a biosorbent.
Assuntos
Carvão Vegetal , Cocos , Lignina , Cocos/química , Carvão Vegetal/química , Lignina/química , Adsorção , Azul de Metileno/química , TemperaturaRESUMO
Residual lignocellulosic biomass (RLB) is a valuable resource that can help address environmental issues by serving as an alternative to fossil fuels and as a raw material for producing various value-added molecules. To gain a comprehensive understanding of the use of lignocellulosic waste in South America, a review was conducted over the last 4 years. The review focused on energy generation, biofuel production, obtaining platform molecules (such as ethanol, hydroxymethylfurfural, furfural, and levulinic acid), and other materials of interest. The review found that Brazil, Colombia, and Ecuador had the most RLB sources, with sugarcane, oil palm, and rice crop residues being the most prominent. In South America, RLB is used to produce biogas, syngas, hydrogen, bio-oil, biodiesel, torrefied biomass, pellets, and biomass briquettes. The most studied and produced value-added molecule was ethanol, followed by furfural, hydroxymethylfurfural, and levulinic acid. Other applications of interest that have been developed with RLB include obtaining activated carbon and nanomaterials. Significant progress has been made in South America in utilizing RLB, and some countries have been more proactive in regulating its use. However, there is still much to learn about the potential of RLB in each country. This review provides an updated perspective on the typification and valorization of residual biomass in South America and discusses the level of research and technology being applied in the region. This information can be helpful for future research on RLB in South America.
Assuntos
Biocombustíveis , Biomassa , Lignina , Lignina/química , América do SulRESUMO
The purpose of this research was to evaluate the efficacy of sodium lignosulfonate (LS) as a dye adsorbent in the removal of methylene blue (MB) from water by polymer-enhanced ultrafiltration. Various parameters were evaluated, such as membrane molecular weight cut-off, pH, LS dose, MB concentration, applied pressure, and the effect of interfering ions. The results showed that the use of LS generated a significant increase in MB removal, reaching an elimination of up to 98.0 % with 50.0 mg LS and 100 mg L-1 MB. The maximum MB removal capacity was 21 g g-1 using the enrichment method. In addition, LS was reusable for up to four consecutive cycles of dye removal-elution. The removal test in a simulated liquid industrial waste from the textile industry was also effective, with a MB removal of 97.2 %. These findings indicate that LS is highly effective in removing high concentrations of MB dye, suggesting new prospects for its application in water treatment processes.
Assuntos
Lignina , Azul de Metileno , Ultrafiltração , Poluentes Químicos da Água , Purificação da Água , Azul de Metileno/química , Lignina/química , Lignina/análogos & derivados , Ultrafiltração/métodos , Poluentes Químicos da Água/química , Poluentes Químicos da Água/isolamento & purificação , Purificação da Água/métodos , Concentração de Íons de Hidrogênio , Corantes/química , Corantes/isolamento & purificação , Adsorção , Polímeros/químicaRESUMO
Cellulose modified hydrogels can be produced directly from raw biopolymers in novel cellulose solvents such as NaOH/urea aqueous solution. The effect of cellulose characteristics on the synthesis of a cellulose-graft-(net-poly(acrylamide-co-acrylic acid)) and its performance as water absorbent/methylene blue dye removal material is analyzed. Three cellulose samples, one analytical grade and two obtained from teak wood sawdust with different pretreatments (one alkaline and the other, a novel one known as (gas phase) acid pretreatment) were compared. The starting raw celluloses were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray diffraction (XRD) and viscosity in cupri ethylenediamine hydroxide (CED) solution, whereas the chemically modified materials were characterized by SEM, FTIR, and TGA. The pretreatment used influences composition, crystallinity index and degree of polymerization (DP) of the cellulose obtained. The modified material produced with cellulose from alkaline pretreatment showed the highest swelling ratio in water absorption tests at room temperature (12,714 %); in contrast, the one with cellulose from acid pretreatment showed the lowest swelling ratio (7,470 %). However, this difference is not so significative in dye removal tests, where absorption capacity is 139 and 140 mg/g, respectively. The results indicate that cellulose composition, particularly structures with significant hemicellulose and lignin remaining content, has a major effect on the performance of modified materials for water absorption, and degree of polymerization has a major effect on adsorption capacity of methylene blue.
Assuntos
Celulose , Corantes , Lignina , Água , Madeira , Lignina/química , Celulose/química , Água/química , Madeira/química , Corantes/química , Resinas Acrílicas/química , Azul de Metileno/química , Espectroscopia de Infravermelho com Transformada de Fourier , Difração de Raios X , Purificação da Água/métodos , Poluentes Químicos da Água/química , Acrilamidas/químicaRESUMO
Cotreatment, mechanical disruption of lignocellulosic biomass during microbial fermentation, is a potential alternative to thermochemical pretreatment as a means of increasing the accessibility of lignocellulose to biological attack. Successful implementation of cotreatment requires microbes that can withstand milling, while solubilizing and utilizing carbohydrates from lignocellulose. In this context, cotreatment with thermophilic, lignocellulose-fermenting bacteria has been successfully evaluated for a number of lignocellulosic feedstocks. Here, cotreatment was applied to sugarcane bagasse using monocultures of the cellulose-fermenting Clostridium thermocellum and cocultures with the hemicellulose-fermenting Thermoanaerobacterium thermosaccharolyticum. This resulted in 76 % carbohydrate solubilization (a 1.8-fold increase over non-cotreated controls) on 10 g/L solids loading, having greater effect on the hemicellulose fraction. With cotreatment, fermentation by wild-type cultures at low substrate concentrations increased cumulative product formation by 45 % for the monoculture and 32 % for the coculture. These findings highlight the potential of cotreatment for enhancing deconstruction of sugarcane bagasse using thermophilic bacteria.
Assuntos
Celulose , Técnicas de Cocultura , Fermentação , Saccharum , Solubilidade , Saccharum/química , Celulose/metabolismo , Celulose/química , Clostridium thermocellum/metabolismo , Thermoanaerobacterium/metabolismo , Lignina/metabolismo , Lignina/química , Bactérias Anaeróbias/metabolismoRESUMO
Jatobá-do-cerrado fruit shells, archetypical of lignocellulosic-based biomass, were used as an adsorbent to remove crystal violet (CV) and methylene blue (MB) from water. The adsorbent was characterized using various techniques, and kinetic studies showed dye adsorption followed second-order kinetics. An experimental design investigated the effects of pH and temperature on removal efficiency, with a quadratic model fitting the data best. The results suggest pH influences MB's adsorption capacity more than temperature and at 25 °C and pH 8, MB had a desirability value of 0.89, with 95 % removal efficiency. For CV, temperature had a greater influence, with a desirability value of 0.874 at 25 °C and pH 10, and 95 % removal efficiency. Adsorption isotherm studies revealed maximum adsorption capacities of 123.0 mg·g-1 and 113.0 mg·g-1 for CV and MB, respectively. Experimental thermodynamic parameters indicated an endothermic and spontaneous process which it was supported by quantum chemistry calculations. The protocols developed confirmed the potential for adsorbing CV and MB dyes in water, achieving over 73.1 and 74.4 mg g-1 dyes removal.
Assuntos
Biomassa , Corantes , Lignina , Azul de Metileno , Poluentes Químicos da Água , Adsorção , Lignina/química , Corantes/química , Corantes/isolamento & purificação , Poluentes Químicos da Água/química , Poluentes Químicos da Água/isolamento & purificação , Concentração de Íons de Hidrogênio , Cinética , Azul de Metileno/química , Azul de Metileno/isolamento & purificação , Temperatura , Purificação da Água/métodos , Violeta Genciana/química , Violeta Genciana/isolamento & purificação , Termodinâmica , Teoria da Densidade FuncionalRESUMO
Diverse methodologies exist to determine the chemical composition, proximate analysis, and calorific value of biomass. Researchers select and apply a specific methodology according to the lignocellulosic material they study and the budgetary resources available. In this project, we determined the primary chemical constitution and proximate analysis of Prosopis laevigata (Humb. & Bonpl.) Jonhst wood using a traditional chemical method and a novel procedure based on the deconvolution of the DTG signal produced by TGA. The highest calorific value was verified using a calorimetric pump based on mathematical models. We also conducted elemental analysis and a microanalysis of ash, and applied Fourier transform infrared spectroscopic analysis (FT-IR). The means of the results obtained by the chemical method and TGA-DTG, respectively, were: hemicelluloses 7.36%-(8.72%), cellulose 48.28%-(46.08%), lignin 30.57%-(32.44%), extractables 13.53%-(12.72%), moisture 2.03%-(4.96%), ash 1.77%-(1.90%), volatile matter 75.16%-(74.14%), and fixed carbon 23.05%-(18.93%). The procedure with the calorimetric pump generated a calorific value above 20.16 MJ/kg. The range generated by the various models was 18.23-21.07 MJ/kg. The results of the elemental analysis were: carbon 46.4%, hydrogen 6.79%, oxygen 46.43%, nitrogen 0.3%, and sulfur 0.5%. The microanalysis of ash identified 18 elements. The most abundant ones were potassium Ë calcium Ë sodium. Based on the infrared spectrum (FT-IR) of Prosopis laevigata wood, we detected the following functional groups: OH, C-H, C=O, CH2, CH3, C-O-C, C-OH, and C4-OH. Our conclusion is that the TGA-DTG method made it possible to obtain results in less time with no need for the numerous reagents that chemical procedures require. The calorific value of P. laevigata wood is higher than the standards. Finally, according to our results, proximate analysis provides the best model for calculating calorific value.
Assuntos
Lignina , Prosopis , Termogravimetria , Madeira , Madeira/química , Espectroscopia de Infravermelho com Transformada de Fourier/métodos , Prosopis/química , Lignina/química , Lignina/análise , Biomassa , Celulose/química , Celulose/análise , PolissacarídeosRESUMO
The increasing water contamination by toxic heavy metals, particularly hexavalent chromium, has become a significant environmental concern. This study explores the pyrolysis of termite-processed biomass, specifically Pinus elliottii particleboard and its termite droppings (TDs), to produce biochar and its application for chromium (VI) adsorption. Termite droppings, rich in lignin, and particleboard, rich in cellulose, were pyrolyzed at various temperatures to assess the effect of biomass composition on biochar properties. The study found that lignin-rich termite droppings produced biochar with higher fixed carbon content and specific surface area than cellulose-rich particleboard biochar. FTIR and Raman spectroscopy revealed significant molecular structure changes during pyrolysis, which influenced the adsorption capabilities of the biochar. Adsorption experiments demonstrated that TD biochar exhibited significantly higher chromium (VI) adsorption capacity, attributed to its distinct chemical composition and enhanced surface properties due to higher lignin content. These findings underscore the crucial role of lignin in producing efficient biochar for heavy metal adsorption, highlighting the practical applicability of termite-processed biomass in water purification technologies.