RESUMO

The steel industry, crucial to the global economy, grapples with critical sustainable challenges, including high energy consumption, greenhouse gas emissions, and non-renewable resource utilization, making sustainability imperative for upholding its economic role without compromising the planet or societal well-being. This study proposes a framework aimed at advancing sustainability in the steel industry through the articulation of the triple helix sectors (university, industry, and government). Based on the integrative review scientific method, systematic selection, interpretation, and synthesis of information from various sources were carried out to map a technical-scientific scenario of sustainability in the steel industry. This scenario informed benchmarking which, in light of the scientific theory and the authors' expertise, enabled the proposition of customized actions aimed at the triple helix actors. The main theoretical-scientific contribution lies in deepening and expanding the knowledge that connects sustainability to the steel industry, thus reinforcing the basis for future research and empirical studies. As for the managerial-applied contribution, this work can guide universities in developing sustainable projects and establishing industrial partnerships; steel companies benefit from the best practices and technologies, while also achieving regulatory compliance; and governments can promote public policies that boost sustainability in the steel sector.

Assuntos

RESUMO

AIM: To compare eight large- and low-tapered heat-treated reciprocating instruments regarding their design, metallurgy, mechanical properties, and irrigation flow through an in silico model. METHODOLOGY: A total of 472 new 25-mm E-Flex Rex (25/.04 and 25/.06), Excalibur (25/.05), Procodile (25/.06), Reciproc Blue R25 (25/.08v), WaveOne Gold Primary (25/.07v), and Univy Sense (25/.04 and 25/.06) instruments were evaluated regarding their design (stereomicroscopy, scanning electron microscopy, and 3D surface scanning), metallurgy (energy-dispersive X-ray spectroscopy and differential scanning calorimetry), and mechanical performance (cyclic fatigue, torsional resistance, cutting ability, bending and buckling resistance). Computational fluid dynamics assessment was also conducted to determine the irrigation flow pattern, apical pressure, and wall shear stress in simulated canal preparations. Kruskal-Wallis and one-way anova post hoc Tukey tests were used for statistical comparisons (α = 5%). RESULTS: Instruments presented variations in blade numbers, helical angles, and tip designs, with all featuring non-active tips, symmetrical blades, and equiatomic nickel-titanium ratios. Cross-sectional designs exhibited an S-shaped geometry, except for WaveOne Gold. Univy 25/.04 and Reciproc Blue displayed the smallest and largest core diameters at D3. Univy 25/.04 and E-Flex Rec 25/.04 demonstrated the longest time to fracture (p < .05). Reciproc Blue and Univy 25/.04 exhibited the highest and lowest torque to fracture, respectively (p < .05). Univy 25/.04 and Reciproc Blue had the highest rotation angles, whilst E-Flex Rec 25/.06 showed the lowest angle (p < .05). The better cutting ability was observed with E-Flex Rec 25/.06, Procodile, Excalibur, and Reciproc Blue (p > .05). Reciproc R25 and E-Flex Rec showed the highest buckling resistance values (p < .05), with WaveOne Gold being the least flexible instrument. The impact of instruments' size and taper on wall shear stress and apical pressure did not follow a distinct pattern, although Univy 25/.04 and E-Flex Rec 25/.06 yielded the highest and lowest values for both parameters, respectively. CONCLUSIONS: Low-tapered reciprocating instruments exhibit increased flexibility, higher time to fracture, and greater angles of rotation, coupled with reduced maximum bending loads and buckling strength compared to large-tapered instruments. Nevertheless, low-tapered systems also exhibit lower maximum torque to fracture and inferior cutting ability, contributing to a narrower apical canal enlargement that may compromise the penetration of irrigants in that region.

Assuntos

Assuntos

RESUMO

AIM: To assess the influence of a flat-side design on the geometry, metallurgy, mechanical performance and shaping ability of a novel nickel-titanium rotary instrument. METHODOLOGY: Sixty-five new 25-mm flat-side rotary instruments (size 25, taper 0.04) and their nonflat-side prototypes (n = 65) were assessed for major deformations and examined regarding macroscopic and microscopic design, determination of nickel and titanium elements ratio, measurement of phase transformation temperature and evaluation of mechanical performance parameters including time/cycles to fracture, maximum torque, angle of rotation, maximum bending and buckling strengths and cutting ability. Additionally, unprepared canal areas, volume of hard tissue debris and percentage reduction of dentine thickness were calculated for each tested instrument after preparing mesial canals of mandibular molars (n = 12), using micro-CT imaging. Statistical analyses were performed using the U-Mann-Whitney test and independent Student t-test (α = 5%). RESULTS: The number of spirals (n = 8) and blade direction (clockwise) were similar between both flat and nonflat instruments, whilst the helical angles were equivalent (⁓25°). Flat-instruments showed inconsistencies in the homogeneity of the gold colour on the flat-side surface, blade discontinuity, and incomplete and variable S-shaped cross-sections. The titanium-to-nickel ratios were equivalent, but significant differences in the R-phase finish and austenitic start phase transformation temperatures were observed between the flat and nonflat-side instruments. The flat-side instruments demonstrated superior cutting ability compared to the nonflat instruments, as well as, significantly lower values for time to fracture, rotation to fracture and maximum torque to fracture (p < .001). No statistical difference was observed between tested instruments regarding angle of rotation (p = .437), maximum bending (p = .152) and buckling load (p = .411). Preparation protocols using flat and nonflat instruments did not show any statistically significant differences (p > .05). All flat-side instruments exhibited deformation after shaping procedures. CONCLUSIONS: The flat-side instrument showcased enhanced cutting ability compared to its nonflat counterpart. However, it exhibited inferior performance in terms of time, rotation and maximum torque to fracture, along with distinct phase transformation temperatures. No differences were observed in the titanium-to-nickel ratios, angle of rotation, maximum bending, buckling load, preparation time, percentage of untouched canal walls, volume of hard tissue debris and percentage reduction of dentine thickness.

Assuntos

RESUMO

OBJECTIVE: This study aimed to compare 3 reciprocating systems regarding design, metallurgy, mechanical properties, and shaping ability. MATERIALS AND METHODS: New Reciproc Blue R25, WaveOne Gold Primary, and REX 25 instruments (n=41 per group) were analyzed regarding design, metallurgy, and mechanical performance, while shaping ability (untouched canal walls, volume of removed dentin, and hard tissue debris) was tested in 36 anatomically matched root canals of mandibular molars. Results were compared using one-way ANOVA post hoc Tukey and Kruskal-Wallis tests with a significant level set at 5%. RESULTS: All instruments showed symmetrical cross sections with asymmetrical blades, no radial lands, no major defects, and an almost equiatomic nickel and titanium ratio. The highest R-phase start temperatures were observed with WaveOne Gold (46.1°C) and REX (44.8°C), while Reciproc Blue had the lowest R-phase start (34.5°C) and finish (20°C) temperatures. WaveOne Gold had the lowest time to fracture (169 s) and the highest maximum load (301.6 gf) (P <0.05). The maximum torque of Reciproc Blue (2.2 N.cm) and WaveOne Gold (2.1 N.cm) were similar (P >0.05), but lower than REX (2.6 N.cm) (P <0.05). No statistical differences were observed among instruments in the angle of rotation (P >0.05) and in the shaping ability in both mesial and distal canals (P >0.05). CONCLUSION: Although the overall design, temperature transition phases and mechanical behavior parameters were different among tested instruments, they were similar in terms of shaping ability. CLINICAL RELEVANCE: All tested heat-treated NiTi reciprocating systems showed similar shaping ability, without clinically significant errors.

Assuntos

RESUMO

The atmospheric Pb emissions (1901-2019), from one of the world's largest non-ferrous metallurgical complexes (Met-Mex in Torreón, México), were estimated based on historical records of modifications in the design, processes, and production volumes. Eight historical periods, with differing amounts of Pb emissions, were distinguished: (1) Essentially no controls (1901-1960); (2) migration to limited controls (1961-1972) by conversion to a Pb-Zn smelter-refining complex and installation of SO2 collectors in 1961-1963; (3) completion to limited control (1973-1977) by the installation of a third H2SO4 collector and a low-efficiency filtration system; (4) maintenance of limited control with no changes (1978-1987); (5) migration to strict control (1988 to 1998) by updating H2SO4 collectors and installation of fertilizer and SO2 liquid extraction plants; (6) completion to strict control (1999-2000) by the installation of state-art technology filtration systems and roofing working areas; (7) migration to abatement (2001-2003) by implantation of good management practices; and (8) maintenance of abatement following good management practices (2004-2019). Based on differences between those periods, we reconstructed the evolution of the Pb emission reduction efficiency (ER in %) and Pb emission factors (EF in gram/ton) for the Torreón complex. Pb emitted by the complex over the past 118 years totaled 23,350-27,580 t, with most of it (63-75%) occurring when emission controls were negligible (pre-1960 period). In comparisons with other facilities worldwide (e.g., the USA, Canada, and Europa), the modification in Met-Mex for control the Pb emission occurred several years. Emissions from the primary Pb-Zn smelter-refining are released mostly to the atmosphere from the sintering, smelting, drossing, and refining. While Pb emissions from the facility have declined by over an order of magnitude to contemporary levels (≤ 12.6 t/year), the current Pb rates still account for atmospheric Pb levels that are 2-3 times higher the USEPA standard and still constitutes a major health threat in Torreón.

Assuntos

RESUMO

The data obtained in this study represent a comprehensive assessment of human exposure to metal(loids) enriched in the environment, derived from metallurgical activities in Cedral, a town in North-Central Mexico. A multi-elemental analysis (As, Cd, Cr, Cu, Fe, Mn and Sb) shows high metal(loid) content in environmental media (tailings samples, dust samples and particulate matter < 2.5 µm collected in the urban area). Blood samples from school-age children were collected and analyzed to determine exposure levels. The assessment of the data obtained from this study shows that Sb and Cd are highly enriched elements in the environment of Cedral; their respective levels in the blood samples analyzed are 10.9 and 11.3 times higher than their pediatric reference levels. The statistical analysis indicates a strong relationship between metal(loid)s in blood samples and both dust and PM2.5 samples, which reveal that ingestion and inhalation could represent important exposure routes for metal(loid) intake. Continuous monitoring in the area is paramount to assess the health impact posed by the different routes of exposure. It is also important to implement health education programs to decrease the population's exposure to metal(loid)s and to design urgent remediation measures, to be implemented as soon as possible.

Assuntos

RESUMO

Galvanizing industries generate large amounts of effluents rich in toxic and carcinogenic chromium(VI) species. Effective and sustainable treatments are required to comply with environmental regulations. This work focused on the development of innovative treatments for Cr(VI) by its removal from a galvanizing industry wastewater (pHinitial = 5.9) containing Cr (78 mg.L-1) and Zn (2178 mg.L-1) using the liquid surfactant membranes technique. The membrane phase carrier was Alamine® 336 in Escaid™ 110. For a synthetic solution (Cr(VI) = 353mg.L-1, pHinternal phase = 1.5), 99.9% of Cr(VI) was extracted in three stages ([KOH]internal phase = 0.27 mol.L-1). For the galvanizing wastewater, two selective extractions treatments were proposed: (1) 87% of Cr(VI) and 2% of Zn(II) were extracted in a single stage ([HCl]feed phase = 0.03 mol.L-1, [KOH]internal phase = 0.6 mol.L-1); (2) 95.6% of Cr(VI) and practically no zinc were extracted in a single stage ([HCl] feed phase = 10-6mol.L-1, [HCl] internal phase = 5mol.L-1). In another treatment condition ([HCl] feed phase = 2mol.L-1 and [KOH] internal phase = 1.2 mol.L-1), the simultaneous Cr(VI) and Zn(II) extractions (95% and 70%, respectively) were obtained in a single stage and more than 99% of both metals in three stages. This resulted in a depleted feed phase with 0.01 mg.L-1 of Cr(VI), that allows its discharge, according to the Brazilian legislation (≤0.1 mg/L).

Assuntos

RESUMO

This study presents evidence of two tuyères, or blowpipe tips, used in metalworking at the Postclassic period city of Mayapán. Blowpipe technology has long been hypothesized to be the production technique for introducing oxygen to furnaces during the metal casting process on the basis of ethnohistorical depictions of the process in ancient Mesoamerica. To our knowledge, the tuyères recovered at Mayapán are the first archaeologically documented tuyères for pre-Hispanic Mesoamerica. The dimensions, internal perforation, vitrification, and presence of copper prills within the ceramic fabric, suggest that they were used in pyrotechnological production, likely metalworking, and is consistent with previous evidence for small-scale metalworking at Mayapán. Blowpipe use in metallurgical production is a logical extension of a much longer tradition of blowgun use in hunting, which was likely already present in Mesoamerica by the time metal was introduced to West Mexico from South America. Furthermore, the dimensions of the Mayapán tuyères are consistent with the internal diameter of ethnohistorically-documented blowguns from Jacaltenango in the southwest Maya region. We conducted replication experiments that suggest that when combined with wooden blowpipes, the Mayapán tuyères would have been ideal for small-scale, furnace-based metallurgy, of the type identified at Mayapán from Postclassic period contexts.

Assuntos

RESUMO

Biodegradable metallic materials (BMMs) are expected to corrode gradually in vivo after providing the structural support to the tissue during its regeneration and healing processes. These characteristics make them promising candidates for use in stents. These endoprostheses are produced from metal alloys by casting and thermomechanical treatment. Since porous alloys and metals have less corrosion resistance than dense ones, the use of powder metallurgy becomes an option to produce them. Among the metals, iron has been proposed as a material in the manufacturing of stents because of its mechanical properties. However, even then it is unclear what toxicity threshold is safe to the body. Thus, the objective of this research was to verify the biocompatibility of sintered 99.95% and 99.5% pure iron by powder metallurgy in vitro with Adipose-derived mesenchymal stromal cells (ADSCs) and in vivo with a Wistar rat model. Herein, characterizations of iron powder samples produced by the powder metallurgy and the process parameters as compression pressure, atmosphere, sintering time and temperature were determined to evaluate the potential of production of biodegradable implants. The samples obtained from pure iron were submitted to tests of green and sintered density, porosity, microhardness, hardness and metallography. The biocompatibility study was performed by indirect and direct cell culture with iron. The effects of corrosion products of iron on morphology, viability, and proliferation of ADSCs were evaluated in vitro. Hemolysis assay was performed to verify the hemocompatibility of the samples. In vivo biocompatibility was evaluated after pure iron discs were implanted subcutaneously into the dorsal area of Wistar rats that were followed up to 6 months. The results presented in this paper validated the potential to produce biodegradable medical implants by powder metallurgy. Both iron samples were hemocompatible and biocompatible in vitro and in vivo, although the 99.95% iron had better performance in vitro than 99.5%.

Assuntos