RESUMO

Husks of rice (RH), coffee (CH), and cholupa (CLH) were used to produce natural adsorbents. The natural adsorbents were used to remove pharmaceuticals such as diclofenac, ciprofloxacin, and acetaminophen in a mixture of distilled water. However, CH stood out for its efficiency in removing ciprofloxacin (74%) due to the higher concentration of acidic groups, as indicated by the Boehm method. In addition, CH removed 86% of ciprofloxacin individually. Therefore, CH was selected and used to remove other fluoroquinolones, such as levofloxacin and Norfloxacin. Although electrostatic interactions favored removals, better removal was observed for ciprofloxacin due to its smaller molecular volume. Then, ciprofloxacin was selected, and the effect of pH, matrix, and adsorbent doses were evaluated. In this way, using a pH of 6.2 in urine with a dose of 1.5 g L-1, it is possible to adsorb CIP concentrations in the range (0.0050-0.42 mmol L-1). Subsequently, the high R2 values and low percentages of APE and Δq indicated better fits for pseudo-second-order kinetics, suggesting a two-stage adsorption. At the same time, the Langmuir isotherm recommends a monolayer adsorption with a Qm of 25.2 mg g-1. In addition, a cost of 0.373 USD/g CIP was estimated for the process, where the material can be reused up to 4 times with a CIP removal in the urine of 51%. Consequently, thermodynamics analysis showed an exothermic and spontaneous process with high disorder. Furthermore, changes in FTIR analysis after adsorption suggest that CH in removing CIP in urine involves electrostatic attractions, hydrogen bonds and π-π interactions. In addition, the life cycle analysis presents, for the 11 categories evaluated, a lower environmental impact of the CIP removal in urine with CH than for the preparation of adsorbent, confirming that the adsorption process is more environmentally friendly than materials synthesis or other alternatives of treatments. Furthermore, future directions of the study based on real applications were proposed.

Assuntos

RESUMO

Species of Haemogregarina are blood parasites known to parasitise vertebrate hosts, including fishes (Haemogregarina sensu lato) and freshwater turtles (Haemogregarina sensu stricto). Their vectors, include gnathiid isopods and leeches, respectively. In turtles, Haemogregarina balli has the best-characterized life cycle in the genus. However, no studies in Brazil have suggested a possible vector for any species of Haemogregarina from freshwater turtles. Therefore, in the present study, we provide insights into a leech vector based on specimens found feeding on two species of freshwater turtles, Podocnemis unifilis and Podocnemis expansa, using morphological and molecular data. In 2017 and 2019, freshwater turtles were collected in Goiás State, Brazil. Hosts were inspected for ectoparasites and leeches were collected from two specimens of P. expansa and nine specimens of P. unifilis. Leeches were subsequently identified as members of the genus Unoculubranchiobdella. Leech histological slides revealed haemogregarine-like structures, similar to post-sporogonic merogony, found near the gills and within the posterior sucker. Molecular analysis of the haemeogregarines resulted in the identification of three species of Haemogregarina: Haemogregarina embaubali, Haemogregarina goianensis, and Haemogregarina brasiliana. Therefore, our findings, based on morphology and DNA data suggest leeches of the genus Unoculubranchiondella as vectors for at least three species of Haemogregarina from Brazilian turtles.

Assuntos

RESUMO

The ceramic tile industry, with significant energy and material demands in its manufacturing processes, has employed technological innovations in energy efficiency, advanced equipment and tile thickness reduction to address these challenges. This study aimed to assess the impact of Ag2O, CuFe2O4, Fe3O4, and SiO2 nanoparticles (0%, 1%, and 5% by weight) on the mechanical strength, water absorption, and apparent thermal conductivity of ceramic tiles, as well as their capacity to reduce energy and raw material consumption. This reduction translates into a decrease in environmental impacts, which have been evaluated through life cycle assessment (LCA) methodology applied to the manufacturing processes. Nanoparticles (Ag2O, CuFe2O4, Fe3O4, and SiO2) were initially screened on TF clay (0%, 1%, 5% w/w), and the most effective were applied to CR1 and CR2 clays (0%, 1%, 5% w/w). Findings indicated a 32% increase in temperature gradient and a 16% improvement in flexural strength with the addition of Fe3O4 nanoparticle at 1% (w/w) in TF clay. Furthermore, there was a potential 48% reduction in energy consumption, and up to 16% decrease in tile weight or thickness without affecting the flexural strength property of the test tiles. LCA results demonstrated that the addition of Fe3O4 nanoparticle has potential reductions of up to 20% in environmental impacts. This study suggests that nanoparticle addition offers a viable alternative for reducing energy and material consumption in the ceramic tile industry. Future research should focus on assessing the economic impact of transitioning to a sustainable business model in the ceramic tile industry with nanoparticles addition.

RESUMO

Biosurfactants have been profiled as a sustainable replacement for chemical-based surfactants since these bio-based molecules have higher biodegradability. Few research papers have focused on assessing biosurfactant production to elucidate potential bottlenecks. This research aims to assess the techno-economic and environmental performance of surfactin production in a potential scale of 65m3, considering different product yields and involving the European energy crisis of 2021-2022. The conceptual design, simulation, techno-economic, and environmental assessments were done by applying process engineering concepts and software tools such as Aspen Plus v.9.0 and SimaPro v.8.3.3. The results demonstrated the high economic potential of surfactin production since the higher values in the market offset the low fermentation yields, low recovery efficiency, and high capital investment. The sensitivity analysis of the economic assessment elucidated a minimum surfactin selling price between 29 and 31 USD/kg of surfactin, while a minimum processing scale for economic feasibility between 4 and 5 kg/h is needed to reach an equilibrium point. The environmental performance must be improved since the carbon footprint was 43 kg CO2eq/kg of surfactin. The downstream processing and energy demand are the main bottlenecks since these aspects contribute to 63 and 25% of the total emissions. The fermentation process and downstream process are key factors for future optimization and research.

RESUMO

Background: Spodoptera frugiperda (FAW) is a pest that poses a significant threat to corn production worldwide, causing millions of dollars in losses. The species has evolved into two strains (corn and rice) that differ in their genetics, reproductive isolation, and resistance to insecticides and Bacillus thuringiensis endotoxins. The microbiota plays an important role in insects' physiology, nutrient acquisition, and response to chemical and biological controls. Several studies have been carried out on FAW microbiota from larvae guts using laboratory or field samples and a couple of studies have analyzed the corn strain microbiota across its life cycle. This investigation reveals the first comparison between corn strain (CS) and rice strain (RS) of FAW during different developmental insect stages and, more importantly, endosymbiont detection in both strains, highlighting the importance of studying both FAW populations and samples from different stages. Methods: The composition of microbiota during the life cycle of the FAW corn and rice strains was analyzed through high-throughput sequencing of the bacterial 16S rRNA gene using the MiSeq system. Additionally, culture-dependent techniques were used to isolate gut bacteria and the Transcribed Internal Spacer-ITS, 16S rRNA, and gyrB genes were examined to enhance bacterial identification. Results: Richness, diversity, and bacterial composition changed significantly across the life cycle of FAW. Most diversity was observed in eggs and males. Differences in gut microbiota diversity between CS and RS were minor. However, Leuconostoc, A2, Klebsiella, Lachnoclostridium, Spiroplasma, and Mucispirilum were mainly associated with RS and Colidextribacter, Pelomonas, Weissella, and Arsenophonus to CS, suggesting that FAW strains differ in several genera according to the host plant. Firmicutes and Proteobacteria were the dominant phyla during FAW metamorphosis. Illeobacterium, Ralstonia, and Burkholderia exhibited similar abundancies in both strains. Enterococcus was identified as a conserved taxon across the entire FAW life cycle. Microbiota core communities mainly consisted of Enterococcus and Illeobacterium. A positive correlation was found between Spiroplasma with RS (sampled from eggs, larvae, pupae, and adults) and Arsenophonus (sampled from eggs, larvae, and adults) with CS. Enterococcus mundtii was predominant in all developmental stages. Previous studies have suggested its importance in FAW response to B. thuringensis. Our results are relevant for the characterization of FAW corn and rice strains microbiota to develop new strategies for their control. Detection of Arsenophonus in CS and Spiroplasma in RS are promising for the improvement of this pest management, as these bacteria induce male killing and larvae fitness reduction in other Lepidoptera species.

Assuntos

RESUMO

Diet shift is an opportunity to mitigate the impacts of food systems, which are responsible for about a third of greenhouse gas (GHG) emissions globally and exert various environmental pressures on ecosystems. This study evaluates the mitigation potential of both global and local environmental impacts through dietary changes within the Brazilian context. Furthermore, the study aims to identify the potential benefits and trade-offs that may arise from these dietary transitions, thus providing a comprehensive analysis of the overall environmental implications. To this end, a life cycle assessment (LCA) was performed to evaluate the environmental impacts of a conventional diet in Brazil and seven alternatives, namely adjusted-EAT-Lancet, pescatarian, vegetarian, entomophagic (insect-based food), mycoprotein (microbial-based food), and synthetic (cell-based food) diets. Results indicate a substantial mitigation potential for GHG emissions (4-9 kg CO2e/cap/day) (39 % to 86 %) and land use (4-9 m2/cap/day) (38 % to 82 %) through a diet shift from a conventional diet to any of the seven alternative diets. However, certain trade-offs exist. A diet shift demonstrates no mitigation potential of soil acidification, and opportunities to reduce water eutrophication (0.02-0.2 g Pe/cap/day) (2 % to 24 %) and water consumption (0.2-0.5 m3/cap/day) (7 % to 14 %) were only found by completely substituting animal products for insect-based food, microbial-based food, and cell-based food. This study highlights the considerable potential of dietary changes to mitigate global environmental impacts associated with food systems. By revealing opportunities and challenges, this study supports science-based decision-making and guides efforts toward sustainable and environmentally friendly food consumption patterns.

Assuntos

RESUMO

The recycling of fly ash from municipal solid waste incineration is currently a global issue. This work intends to examine the viability of a novel recycling alternative for fly ashes as a component of fire-resistant plates. To lessen the quantity of heavy metal leaching, the fly ash was utilized after being washed using a water/fly ash ratio of 2 for one hour. Subsequently, an inexpensive, straightforward molding and curing process was used to create a plate, with a composition of 60%wt of MSWI-FA, 30%wt of gypsum, 0.5%wt of glass fiber and 9.5%wt of vermiculite. The plate exhibited high fire resistance. Furthermore, it demonstrated compression, flexural strength and surface hardness slightly lower than the requirements of European Standards. This allows for manufacturing plates with a high washed MSWI-FA content as fire protection in firewalls and doors for homes and commercial buildings. A Life Cycle Assessment was carried out. The case study shows that a 60% substitution of gypsum resulted in an environmental impact reduction of 8-48% for all impact categories examined, except four categories impacts (marine eutrophication, human toxicity (cancer), human non-carcinogenic toxicity and water depletion, where it increased between 2 and 718 times), due to the previous washing of MSWI-FA. When these fly ashes are used as a raw material in fire-resistant materials, they may be recycled and offer environmental advantages over more conventional materials like gypsum.

RESUMO

In order to analyze the environmental performance of Smallholder Dairy Farms (SHDFs) located in the State of Mexico, a Life Cycle Analysis (LCA) was carried out using two methodological approaches (A1 and A2) to estimate and interpret environmental impacts. A1 consisted in obtaining the average inputs and outputs of 15 SHDFs to generate a representative farm life cycle inventory, while A2 included an individual environmental impact analysis per SHDF to obtain average values of the contributions per analyzed midpoint impact category. The feed production subsystem generated the highest contributions to environmental impacts per liter of raw milk produced. Estimated emissions based on A2 approach, resulted in higher environmental impacts compared to results obtained with A1. The estimated values for the midpoint impact categories obtained with A2: Climate change, Fossil depletion, Terrestrial acidification, and Agricultural land occupation, were 8.73%, 30.77%, 100%, and 20.49% higher compared to A1 approach, respectively. While A2 provides more accurate results, it requires more time and resources compared to the integration of a panel of representative dairy farms.

Assuntos

RESUMO

Advanced oxidation processes (AOPs) are wastewater treatment technologies that stand out for their ability to degrade Contaminants of Emerging Concern (CECs). The literature has extensively investigated these removal processes for different aqueous matrices. Once technically mature, some of these systems have become accredited to be applied on a large scale, and therefore, their systemic performances in the environmental and cost spheres have also become essential requirements. This study proposed corroborating this trend, analyzing the available literature on the subject to verify how experts in the AOP area investigated this integration during 2015-2023. For this purpose, a sample of publications was treated by applying the Systematic Review (SR) methodology. This resulted in an extract of 83 studies that adopted life-cycle logic to estimate environmental impacts and process costs or evaluated them as complementary to the technical dimension of each treatment technology. This analysis found that both dimensions can be used for selecting or sizing AOPs at the design scale. However, the appropriate choice of the impact categories for the environmental assessment and establishing a methodology for cost analysis can make the approach still more effective. In addition, a staggering number of processes would broaden the reality and applicability of the estimates, and adopting multicriteria analysis methodologies could address essential aspects of decision-making processes during the design of the arrangements. By meeting the original purposes, the study broadened the requirements for designing AOPs and disseminating their use in mitigating the discharge of CECs.

Assuntos