RESUMO

Southern Chile native potatoes are an interesting raw material to produce novel snacks like colored potato chips. These novel products should be comprehensively evaluated for the presence of undesirable compounds such as acrylamide, 5-hydroxymethylfurfural and furan, the main neoformed contaminants in starchy rich fried foods. This study evaluated the neoformed contaminant levels and oil content on chips made from eleven Chilean potato accessions and compared them with commercial samples. The neoformed contaminant contents were related to Maillard reaction precursor levels (reducing sugars and asparagine) and secondary metabolites (phenolic compounds and carotenoids). Neoformed contaminants correlated well among them and were weakly correlated with reducing sugars and asparagine. Acrylamide level in native potato chips ranged from 738.2 to 1998.6 µg kg-1 while from 592.6 to 2390.5 µg kg-1 in commercial samples. Thus, there is need to implement neoformed contaminant mitigation strategies at different steps of the production chain of colored potato chips.

Assuntos

RESUMO

The aim of this study was to develop a star fruit extract (SFE) and incorporate it into aerogels based on native and phosphorylated potato starches. The phosphorylation of starch enhances its properties by incorporating phosphate groups that increase the spaces between starch molecules, resulting in a more resilient, intact aerogel with enhanced water absorption. The bioactive aerogels based on potato starch and 10, 15, and 20 % (w/w) of SFE were characterized by their morphological and thermogravimetric properties, infrared spectra, water absorption capacity, loading capacity, and antioxidant activity. Epicatechin was the major compound present in SFE. The thermal stability of SFE increased when incorporated into phosphorylated starch aerogels at a concentration of 20 %. The water absorption capacity was higher in phosphorylated starch aerogels (reaching 1577 %) than in their native counterparts (reaching 1100 %). Native starch aerogels with 15 and 20 % SFE exhibited higher antioxidant activity against hydroxyl free radicals compared to phosphorylated starch aerogels, achieving 79.9 % and 86.4 % inhibition for the hydroxyl and nitric oxide radicals, respectively. The ideal choice of freeze-dried aerogel depends on the desired effect, either to act as an antioxidant agent by releasing bioactive compounds from SFE or as a water-absorbent agent in food products.

Assuntos

RESUMO

Among the most consumed foods in the world is potato, which occupies the first place as a non-grain commodity, demonstrating the importance of its assessment concerning the population's food safety. In this study, the nutrients Ca, Mg, K, P, Cu, Mn, Fe, and Zn and the potentially toxic trace elements Cd, Cr, and Pb were evaluated considering their total contents, bioaccessible and bioavailable fractions in different potato cultivars, in an unpublished approach in the literature. The in vitro standard gastrointestinal digestion method (INFOGEST) and a model of the intestinal epithelial barrier using the Caco-2 cell line were applied for investigate the presence of metals in potato. For the macroelements, the bioaccessibility (% w/w) varied in the ranges: K (57-72 %), P (59-76 %), Mg (83-103 %), and Ca (30-123 %), whereas for the microelements were: Cu (27-74 %) and Mn (4.22-12.02, 60-119 %). The potentially of trace toxic elements, Cd and Pb, were found in 75 % of the samples, however, all the concentration values were below the maximum levels allowed of 0.10 µg/g. Chromium was determined only in potato peels and has no maximum established level. The bioaccessible and bioavailable fractions of Cd, Cr, and Pb were below the limits of quantification of the spectrometric methods (LOQ - µg/L: 0.063 Cd, 0.65 Cr, and 0.44 Pb). The potato samples were considered safe for consumption regarding the presence of potentially toxic trace elements, with a remarkable nutritional contribution.

Assuntos

RESUMO

In this article we can observe the scanning by the literature for the pretreatment of steam explosion applied to lignocellulose biomass. A comparison of the chemical and physical characterization of potato peel as a lignocellulose biomass. Besides, the innovative design of a continuous reactor for the potato peel steam explosion process is shown, with specific temperature and pressure conditions on a pilot scale, detailing its parts. Finally, a finite element analysis was performed where stress results were obtained from the reactor material, severity factor, structural analysis and thermal analysis, providing a panorama of the reactor's behavior with the conditions specific.

Assuntos

RESUMO

This work reports on the extraction and characterization of the behavior of starch from residues of several potato varieties (Criolla, Sabanera and Pastusa) of Colombian origin from the Andean region using different techniques and the evaluation of the effect of citric acid (CA) on the grain morphology. Additionally, films were produced with each one of the extracted starches and glycerol. Pastusa variety starch shows a higher granule size than the other varieties and Pastusa starch shows lower amylose content compared to Sabanera and Criolla. Criolla and Pastusa starches exhibit more thermal stability than Sabanera starch. Starch-glycerol films were also produced using the cast solving method. The films were mechanically analyzed by tensile test and the barrier properties were assessed by water vapor permeability (WVP). The tensile strength of the films varied in the 2.0-2.4 MPa range, while the elongation at break was comprised between 25 and 32 %. With regard to water vapor permeability, the obtained values fall within the 4-7 × 10-10 g m-1 s-1 Pa-1 range. It was observed that the thickness of the films and the protein content affected water vapor permeability, increasing this value at higher levels of thickness.

Assuntos

RESUMO

Dry heat treatment (DHT) has been demonstrated as a viable method for starch modification, offering benefits due to its environmentally friendly process and low operational costs. This research modified potato starch using different DHT conditions (continuous-CDHT and cyclic-RDHT), with durations ranging from 3 to 15 h and 1 to 5 cycles, at 120 °C. The study investigated and compared the structural, thermal, pasting, and morphological properties of the treated samples to those of untreated potato starch, including in vitro digestibility post-modification. DHT altered the amylose content of the biopolymer. X-ray diffraction patterns transitioned from type B to type C, and a decrease in relative crystallinity (RC%) was observed. Morphological changes were more pronounced in starches modified by RDHT. Paste viscosities of both CDHT and RDHT-treated starches decreased significantly, by 61.7 % and 58.1 % respectively, compared to native starch. The gelatinization enthalpy of RDHT-treated starches reduced notably, from 17.60 to 16.10 J g-1. Additionally, starch digestibility was impacted, with cyclic treatments yielding a significant increase in resistant starch content, notably an 18.26 % rise. These findings underscore the efficacy of dry heat in enhancing the functional properties of potato starch.

Assuntos

RESUMO

Natural fermentation with sun-drying is a modification that promotes the expansion capacity of starch, and its effects on potato starch have not been reported so far. The aim of this study was to evaluate the effects of the amylose content of potato (Solanum tuberosum L.) starches and natural fermentation followed by oven or sun drying on its properties. Cassava starch was also used a control. Native and fermented starches were evaluated based on their chemical composition, amylose, carboxyl and carbonyl content as well as their thermal, pasty, and morphological properties. The fermentation water was evaluated by pH and titratable acidity to control the process. Puffed balls were prepared to evaluate expandability, mass loss, porosity and texture. The fermentation intensity was greater for potato and cassava starch with low-amylose content than for potato starch with higher amylose content. In addition, the acidity of the fermentation water increased faster with cassava starch than with potato starches. The fermented potato starches with the highest amylose content had low acidity and low expansion capacity compared to the fermented potato and cassava starches with low-amylose content. Fermentation and sun-drying of low-amylose potato and cassava starches increased the expansion and reduced the hardness of the puffed balls.

Assuntos

RESUMO

High Energy Ball-Milling (HEBM) modifies starchs' granule morphology, physicochemical properties, and chemical structure. However, understanding how the HEBM changes the starch chemical structure is necessary to control these modifications. Therefore, this study aimed to investigate the changes in potato starch's long- and short-range molecular order during HEBM at different environmental conditions such as oxygen (Air) and humidity content. Due to the correlation between the starch modification and the energy supplied (Esupp) by the HEBM, Burgio's equation was used to calculate this energy. The starch transformation was followed by X-ray diffraction, Fourier Transform-Infrared Spectroscopy, and Raman spectroscopy. A Principal Component Analysis (PCA) was conducted to reduce the HEBM variables. PAC analysis demonstrated that the different oxygen-humidity conditions do not affect the HEBM of potato starch. Based on the starch chemical structure transformation correlated with Esupp during HEBM, four stages were observed: orientation, modification, mechanolysis, and over-destruction. It was identified for the first time that at low milling energy (<1.5 kJ/g, orientation stage), the glycosidic rings change their orientation, and starch-water interaction increases while the starch's organization reduces. Ergo, the potato starch could be more susceptible to chemical modifications during the first two stages.

Assuntos

RESUMO

BACKGROUND: The natural abundance of stable isotope 15 N (δ15 N) in production systems has emerged as an alternative to distinguish organic products from conventional ones. This study evaluated the use of δ15 N values recorded for nitrogen fertilizers, soil and plant tissue in order to set the differences between organic and conventional agricultural production systems applied to rice, potatoes, apple and banana crops. RESULTS: Values of δ15 N recorded for N sources ranged from +5.58‰ to +18.27‰ and from -3.55‰ to +3.19‰ in organic and synthetic fertilizers, respectively. Values recorded for δ15 N in food from organic rice, potatoes and banana farms were higher than values recorded for δ15 N in conventional farms; the same was observed for values recorded for δ15 N in leaves from the four crops. CONCLUSION: Results have allowed for differentiation between production systems due to values of δ15 N recorded in leaves of all crops and food, for rice, potatoes and banana trees. © 2021 Society of Chemical Industry.

Assuntos

RESUMO

The aim of this study was to verify the efficiency of 1,4-dimethylnapthalene in suppressing sprouting and the consequent maintenance of the quality of potato tubers of Asterix and Challenger cultivars, at different temperatures and storage regimes. Six treatments were tested, with and without 1.4-DNM, at temperatures of 8 ° C and 20 ° C. Assessments were made at 0, 45, 90, 135 and 180 days after application. The parameters evaluated were: number of sprouts, levels of total soluble sugars, levels of reducing and non-reducing sugars and coloration of potato strips after frying. The effects of 1.4-DMN on the quality control of potatoes resulted in sprout control and lower levels of total soluble sugars and reducing sugars, especially in the Challenger cultivar and at a temperature of 20 ºC.

Objetivou-se com este estudo verificar a eficiência do 1,4-dimetilnaftaleno na supressão da brotação e a consequente manutenção da qualidade de tubérculos de batata das cultivares Asterix e Challenger, em diferentes temperaturas e tempos de armazenamento. Foram testados seis tratamentos, com e sem 1,4-DNM, nas temperaturas de 8 °C e 20 °C. As avaliações foram feitas aos 0, 45, 90, 135 e 180 dias após a aplicação. Os parâmetros avaliados foram: número de brotos, teores de açúcares solúveis totais, teores de açúcares redutores, e não redutores, e coloração dos palitos de batata após a fritura. Os efeitos do 1,4-DMN no controle da qualidade das batatas resultaram no controle da brotação e em menores teores de açúcares solúveis totais e de açúcares redutores, sobretudo na cultivar Challenger e à temperatura de 20 ºC.

Assuntos