RESUMO

Banana starch has a highly resistant starch (RS) and slow-digested starch (SDS) content, making it attractive as a functional ingredient. Unfortunately, banana starch requires modification processes due to the loss of RS and SDS during gelatinization because of its thermolabile characteristics. This study explores the effect of banana starch modification by enzymatic, heat moisture treatment (HMT) and dual modification (HMT+ enzymatic) on its nutritional (RS, SDS) and functional properties (hydration, structural, gelation, rheological). HMT and dual modifications decrease RS (from 44.62 g/100 g to 16.62 and 26.66 g/100 g, respectively) and increase SDS (from 21.72 g/100 g to 33.91 and 26.95 g/100 g, respectively) in raw starch but induce structural changes that enhance RS (from 3.10 g/100 g to 3.94 and 4.4 g/100 g, respectively) and SDS (from 2.58 g/100 g to 9.58 and 11.48 g/100 g) thermo-resistance in gelled starch. Also, changes in the functional properties of starches were evidenced, such as weaker gels (hardness < 41 g), lower water absorption (<12.35 g/g), high starch solubility (>1.77 g/100 g) and increased gelatinization temperature. Improved gelatinization temperature and RS thermostability resulted from modifications that could expand banana starch applications as a beverage and compote thickener agent.

Assuntos

RESUMO

The enzymatic modification of starch extends its industrial use to flavor delivery and probiotic encapsulants, among other uses. However, it is not known how starch from different cassava varieties responds to enzymatic hydrolysis. Starches from two Ecuadorian cassava varieties (INIAP 650, an edible starch, and INIAP 651, an industrial starch) were partially modified at three enzymatic hydrolysis degrees (0%, 30%, and 50%), and their physicochemical properties were assessed. The structural analysis revealed that both varieties showed progressive structural damage as hydrolysis increases, probably due to exo-hydrolysis. However, deeper pores were observed in INIAP 651 with the SEM analysis. The crystallinity percentage obtained by XRD analyses remained constant in INIAP 651 and decreased (by 26%) in INIAP 650 (p < 0.05). In addition, the amylose−lipid complex index in INIAP 650 remained constant, while INIAP 651 increased (p < 0.05) at 30% hydrolysis (by 93%). In both varieties, hydrolysis increased (p < 0.05) the water holding capacity (WHC) (by 10−14%) and the water binding capacity (WBC) (by 16%), but 50% hydrolysis of INIAP 650 was needed to significantly affect these properties. No differences were observed in the varieties' thermal properties. Regarding the rheological properties, the variety did not influence the changes in the storage module (G') and the loss modulus (G″) with the hydrolysis (p > 0.05). However, the phase angle decreased significantly (p < 0.05) with the hydrolysis, being higher in the INIAP 650 variety than in the INIAP 651 variety. In general, the results indicate that the variety affects the response of the starch granule to enzymatic hydrolysis (noticeable in the principal component analysis, PCA) and opens up the possibility to modulate starch properties.

Assuntos

RESUMO

Edible insects are being accepted by a growing number of consumers in recent years not only as a snack but also as a side dish or an ingredient to produce other foods. Most of the edible insects belong to one of these groups of insects such as caterpillars, butterflies, moths, wasps, beetles, crickets, grasshoppers, bees, and ants. Insect properties are analyzed and reported in the articles reviewed here, and one common feature is nutrimental content, which is one of the most important characteristics mentioned, especially proteins, lipids, fiber, and minerals. On the other hand, insects can be used as a substitute for flour of cereals for the enrichment of snacks because of their high content of proteins, lipids, and fiber. Technological properties are not altered when these insects-derived ingredients are added and sensorial analysis is satisfactory, and only in some cases, change in color takes place. Insects can be used as substitute ingredients in meat products; the products obtained have higher mineral content than traditional ones, and some texture properties (like elasticity) can be improved. In extruded products, insects are an alternative source of proteins to feed livestock, showing desirable characteristics. Isolates of proteins of insects have demonstrated bioactive activity, and these can be used to improve food formulations. Bioactive compounds, as antioxidant agents, insulin regulators, and anti-inflammatory peptides, are high-value products that can be obtained from insects. Fatty acids that play a significant role in human health and lipids from insects have showed positive impacts on coronary disease, inflammation, and cancer. Insects can be a vector for foodborne microbial contamination, but the application of good manufacturing practices and effective preservation techniques jointly with the development of appropriate safety regulations will decrease the appearance of such risks. However, allergens presented in some insects are a hazard that must be analyzed and taken into account. Despite all the favorable health-promoting characteristics present in insects and insects-derived ingredients, willingness to consume them has yet to be generalized.

RESUMO

Colocasia esculenta (L.) Schott and Xanthosoma sagittifolium (L.) Schott are the most popular tubers among the Araceas family. Their chemical composition related to their nutritional benefits could make these rhizomes a valid option for the nutritional and technological improvement of food products. This chapter provide a clarification about the correct nomenclature of both tubers giving an insight around the principle components and their health effects. The scientific literature review has primarily highlighted several in vitro and animal studies where the consumption (leaves and whole tuber) of Colocasia esculenta (L.) Schott and Xanthosoma sagittifolium (L.) Schott was related with certain antihyperglycemic, antihypertensive, hypoglycemic and prebiotic effects. Owing to their functional properties, different component from these rhizomes, specially starch, mucilage and powders are being used by the food industry. Their ability to behave as thickener and gelling agent has allowed their incorporation in baked food, food paste and beverages. This chapter suggests the development of more research around these rhizomes since they could potentially play, with other crops, an important role in the future sustainable strategies to feed the planet.

Assuntos

RESUMO

In this study the breadmaking potential of lupin flour from L. mutabilis after being debittered (DLF) and solid state fermented (FLF) was evaluated in lupin-wheat breads. Different levels of substitution (10, 15, 20%) were tested on dough rheology and the technological and nutritional (composition and in vitro digestibility indexes) properties of breads, as well as acceptability. Lupin weakened the dough during mixing, having shorter development time and stability, especially FLF. Less relevant was the effect of lupin flours along heating-cooling of the doughs recorded with the Mixolab. DLF and FLF significantly affected technological properties of the lupin-wheat breads at higher substitution (> 10%), particularly reducing bread volume, crust luminosity, crumb cohesiveness and resilience. Detrimental effects observed at the highest substitutions (20%) were diminished when using FLF, although breads received lower score due to the acidic taste detected by panelists. Both lupin flours provided lupin-wheat breads with rather similar composition, rising the average content of proteins, fat and dietary fiber by 0.8, 2.4, 6.5 %, respectively, compared to wheat breads. Likewise, lupin-wheat breads had significantly lower hydrolytic and glycemic indexes. Overall, debittered and fermented lupin could be used for enriching wheat breads, although better technological properties were observed with FLF.

Assuntos

RESUMO

The microstructure of cooked gluten-free pasta depends on the ingredients used, and this microstructure affects the starch hydrolysis (SH), the release of phenolic compounds (PC) and their antioxidant capacity (AC). The aim of this study was to evaluate the SD and bioaccessibility of PC during in vitro gastrointestinal digestion of gluten-free pasta and its relationship with the microstructure. The highest SH was during the intestinal phase (≈60%), but pasta with the highest content of unripe plantain and chickpea presented the lowest release of PC (≈60%). The insoluble dietary fibre could be responsible (≈12.5%) for these effects. The cooked pasta showed high AC in the intestinal phase. Regions with gelatinized starch granules in a less dense protein network and other regions with intact or swollen granules surrounded by a protein network were observed. The starch digestion and bioaccessibility of PC were related to the structure of the matrix.

Assuntos

RESUMO

The effect of germination time on physicochemical characteristics of brown rice flour and its effect on gluten free bread qualities have been investigated. Germination was carried out at 28 °C and 100 % RH for 12, 24 and 48 h; brown rice and soaked brown rice was also analyzed. Significant changes on hydration and pasting properties of brown rice flour were found during germination. The starch degradation by enzyme activity could be evidenced with the decrease in viscosity and water binding capacity (WBC). No significant effect in specific volume, humidity and water activity of the gluten free bread was found as germination time increase, but a significant softness of the crumb was obtained. However, at 48 h of germination, the intense action of α amylase could result in excessive liquefaction and dextrinisation, causing inferior bread quality. Overall, germinated rice flour showed appropriate functionality for being used as raw ingredient in gluten free breadmaking.

RESUMO

In the last decade the development of gluten-free foodstuffs has attracted great attention as a result of better diagnoses of coeliac disease and a greater knowledge of the relationship between gluten-free products and health. The increasing interest has prompted extensive research into the development of gluten-free foodstuffs that resemble gluten-containing foods. This review aims to provide some insights on dough functionality and process conditions regarding bread quality and to point out recent research dealing with the nutritional composition of those products. Gluten-free dough results from the combination of different ingredients, additives, and the processing aids required for building up network structures responsible for bread quality. Some relationships between dough rheology and bread characteristics were established to identify possible predictor parameters. Regarding bread-making processes, the impact of mixing, dough treatment and baking is stated. Nutritional quality is an important asset when developing gluten-free breads, and different strategies for improving it are reviewed. Gluten-free bread quality is dependent on ingredients and additives combination, but also processing can provide a way to improve bread quality. Nutritive value of the gluten-free breads must be always in mind when setting up recipes, for obtaining nutritionally balanced bread with adequate glycaemic index.

Assuntos