RESUMO

Plant-based beverages have gained consumers' attention for being the main substitutes for dairy milk, especially for people with lactose intolerance, milk allergies, and a prevalence of hypercholesterolemia. Moreover, there is a growing demand for a more sustainable diet and plant-based lifestyle due to concerns related to animal wellbeing, environmental impacts linked to dairy production, and the rising cost of animal-derived foods. However, there are some factors that restrict plant-based beverage consumption, including their nutritional quality and poor sensory profile. In this context, fermentation processes can contribute to the improvement of their sensory properties, nutritional composition, and functional/bioactive profile. In particular, the fermentation process can enhance flavor compounds (e.g., acetoin and acetic acid) while decreasing off-flavor components (e.g., hexanal and hexanol) in the substrate. Furthermore, it enhances the digestibility and bioavailability of nutrients, leading to increased levels of vitamins (e.g., ascorbic acid and B complex), amino acids (e.g., methionine and tryptophan), and proteins, while simultaneously decreasing the presence of anti-nutritional factors (e.g., phytic acid and saponins). In contrast, plant-based fermented beverages have been demonstrated to possess diverse bioactive compounds (e.g., polyphenols and peptides) with different biological properties (e.g., antioxidant, anti-inflammatory, and antihypertensive). Therefore, this article provides an overview of plant-based fermented beverages including their production, technological aspects, and health benefits.

RESUMO

Food bioactive peptides are well recognized for their health benefits such as antimicrobial, antioxidant, and antihypertensive benefits, among others. Their drug-like behavior has led to their potential use in targeting skin-related aging factors like the inhibition of enzymes related with the skin-aging process. In this study, canary seed peptides (CSP) after simulated gastrointestinal digestion (<3 kDa) were fractioned by RP-HPLC and their enzyme-inhibition activity towards elastase and tyrosinase was evaluated in vitro. CSP inhibited elastase (IC50 = 6.2 mg/mL) and tyrosinase (IC50 = 6.1 mg/mL), while the hydrophobic fraction-VI (0.2 mg/mL) showed the highest inhibition towards elastase (93%) and tyrosinase (67%). The peptide fraction with the highest inhibition was further characterized by a multilevel in silico workflow, including physicochemical descriptor calculations, antioxidant activity predictions, and molecular dynamics-ensemble docking towards elastase and tyrosinase. To gain insights into the skin permeation process during molecular dynamics simulations, based on their docking scores, five peptides (GGWH, VPPH, EGLEPNHRVE, FLPH, and RPVNKYTPPQ) were identified to have favorable intermolecular interactions, such as hydrogen bonding of polar residues (W, H, and K) to lipid polar groups and 2-3 Å van der Waals close contact of hydrophobic aliphatic residues (P, V, and L). These interactions can play a critical role for the passive insertion of peptides into stratum corneum model skin-membranes, suggesting a promising application of CSP for skin-aging treatments.

Assuntos

RESUMO

The term biopolymer refers to materials obtained by chemically modifying natural biological substances or producing them through biotechnological processes. They are biodegradable, biocompatible and non-toxic. Due to these advantages, biopolymers have wide applications in conventional cosmetics and new trends and have emerged as essential ingredients that function as rheological modifiers, emulsifiers, film-formers, moisturizers, hydrators, antimicrobials and, more recently, materials with metabolic activity on skin. Developing approaches that exploit these features is a challenge for formulating skin, hair and oral care products and dermatological formulations. This article presents an overview of the use of the principal biopolymers used in cosmetic formulations and describes their sources, recently derived structures, novel applications and safety aspects of the use of these molecules.

Le terme biopolymère fait référence aux matériaux obtenus par modification chimique des substances biologiques naturelles ou ceux qui surviennent des processus biotechnologiques. Ils sont biodégradables, biocompatibles, et non-toxiques. Du à leur avantages, les biopolymères ont de larges applications dans les cosmétiques conventionnels ainsi que dans les nouvelles tendances, et se placent comme des ingrédients essentiels qui peut être utilise comme modificateurs rhéologiques, émulsifiants, producteurs de films, humectants, hydratants, antimicrobiens, et, plus récemment, comme matériaux avec activité métabolique sur la peau. Le développement d'approches compte tenu de ces caractéristiques constitue un défi pour la création de produits de soins capillaires, dermatologiques et buccodentaires. Cet article présente une vision sur l'utilisation des principaux biopolymères dans les produits cosmétiques, et décrit leurs sources, leur structures dérivées, les nouvelles applications, ainsi que les aspects de sécurité lies à leur utilisation comme molécules cosmétiques.

Assuntos

RESUMO

Solid lipid nanoparticles (SLN) based on candelilla wax were prepared using the hot homogenization technique. The resulting suspension had monomodal behavior with a particle size of 809-885 nm; polydispersity index < 0.31, and zeta potential of -3.5 mV 5 weeks after monitoring. The films were prepared with SLN concentrations of 20 and 60 g/L, each with a plasticizer concentration of 10 and 30 g/L; the polysaccharide stabilizers used were either xanthan gum (XG) or carboxymethyl cellulose (CMC) at 3 g/L. The effects of temperature, film composition, and relative humidity on the microstructural, thermal, mechanical, and optical properties, as well as the water vapor barrier, were evaluated. Higher amounts of SLN and plasticizer gave the films greater strength and flexibility due to the influence of temperature and relative humidity. The water vapor permeability (WVP) was lower when 60 g/L of SLN was added to the films. The arrangement of the SLN in the polymeric networks showed changes in the distribution as a function of the concentrations of the SLN and plasticizer. The total color difference (ΔE) was greater when the content of the SLN was increased, with values of 3.34-7.93. Thermal analysis showed an increase in the melting temperature when a higher SLN content was used, whereas a higher plasticizer content reduced it. Edible films with the most appropriate physical properties for the packaging, shelf-life extension, and improved quality conservation of fresh foods were those made with 20 g/L of SLN, 30 g/L of glycerol, and 3 g/L of XG.

RESUMO

Consumers today demand the use of natural additives and preservatives in all fresh and processed foods, including meat and meat products. Meat, however, is highly susceptible to oxidation and microbial growth that cause rapid spoilage. Essential oils are natural preservatives used in meat and meat products. While they provide antioxidant and antimicrobial properties, they also present certain disadvantages, as their intense flavor can affect the sensory properties of meat, they are subject to degradation under certain environmental conditions, and have low solubility in water. Different methods of incorporation have been tested to address these issues. Solutions suggested to date include nanotechnological processes in which essential oils are encapsulated into a lipid or biopolymer matrix that reduces the required dose and allows the formation of modified release systems. This review focuses on recent studies on applications of nano-encapsulated essential oils as sources of natural preservation systems that prevent meat spoilage. The studies are critically analyzed considering their effectiveness in the nanostructuring of essential oils and improvements in the quality of meat and meat products by focusing on the control of oxidation reactions and microbial growth to increase food safety and ensure innocuity.

Assuntos

RESUMO

The aim of this work was to obtain pH-dependent nanofibers with an electrospinning technique as a novel controlled release system for the treatment of periodontal disease (PD). Cellulose acetate phthalate (CAP) was selected as a pH-sensitive and antimicrobial polymer. The NF was optimized according to polymeric dispersion variables, polymer, and drug concentration, and characterized considering morphology, diameter, entrapment efficiency (EE), process efficiency (PE), thermal properties, and release profiles. Two solvent mixtures were tested, and CHX-CAP-NF prepared with acetone/ethanol at 12% w/v of the polymer showed a diameter size of 934 nm, a uniform morphology with 42% of EE, and 55% of PE. Meanwhile, CHX-CAP-NF prepared with acetone/methanol at 11% w/v of polymer had a diameter of 257 nm, discontinuous nanofiber morphology with 32% of EE, and 40% of PE. EE and PE were dependent on the polymer concentration and the drug used in the formulation. Studies of differential scanning calorimetry (DSC) showed that the drug was dispersed in the NF matrix. The release profiles of CHX from CHX-CAP-NF followed Fickian diffusion dependent on time (t0.43-0.45), suggesting a diffusion-erosion process and a matrix behavior. The NF developed could be employed as a novel drug delivery system in PD.

RESUMO

The nanoencapsulation of thyme essential oil has been greatly important in food science, given its remarkable antioxidant and antimicrobial capacity. However, its analysis in storage has not been established in terms of physical stability, antioxidant capacity, and release studies. In this paper, chitosan-thyme oil nanocapsules were prepared by the ionic gelation method. These were characterized for differential calorimetry, release kinetic, and infrared spectroscopy. The chitosan-thyme oil nanocapsules were stored at 4 and 25 °C for 5 weeks, the changes in particle size, zeta potential, stability (diffuse reflectance), and antioxidant capacity were analyzed and associated with nanocapsules' functionality. The results show that the storage time and temperature significantly modify the particle size (keeping the nano-size throughout the storage), the release of the bioactive was Fickian with t0.193 according to Korsmery & Peppas and best described by Higuchi model associated with changes in the zeta potential from 8 mV to -11 mV at 4 °C. The differential scanning calorimetry and infrared spectroscopy results confirm the good integration of the components. The antioxidant capacity revealed a direct relationship with residual oil concentration with a decrease in the ABTS test of 15% at 4 °C and 37% at 25 °C. The residual bioactive content was 77% at 4 °C and 62% at 25 °C, confirming nanoencapsulation effectiveness. The present investigation provides helpful information so that these systems can be applied in food conservation.

RESUMO

The objective of this study was to evaluate the effectiveness of a combination of UV-C disinfection treatment and a nano-coating lemon essential oil nanocapsules. The nanocapsules were prepared by ionic gelation with an alginate-pectin wall and the lemon essential oil had a particle size of 219 ± 22 nm and a zeta potential of -7.91 ± 0.18 mV. The lemon essential oil had an encapsulation efficiency of 68.19 ± 1.18%. The fresh-cut cucumber was stored for 15 days at 4 °C. Six formulations of nanocapsules were evaluated, and hydroxypropyl methylcellulose was used as matrix polysaccharide in four coatings. Three formulations were treated with UV-C at 4.5 kJ/m2. The results showed that the combination of UV-C and nano-coatings (lemon essential oil = 200 mg/L) increased the shelf life by up to 15 days. Using UV-C and nano-coatings, the ∆E value was 7.12 at the end of the storage period, while the Control samples had an ∆E of 28.1. With nano-coating treatment, the amount of polyphenols decreased by 23% within 9 days. In contrast, with combined UV-C and nano-coating treatment, the amount of polyphenols was reduced by 38.84% within 15 days. The antioxidant capacity remained stable at 459 µmol TE/100 g for the fresh product when the combined treatment was used. A good correlation was also observed between the increasing of the fruit's shelf life and decreasing of its enzymatic activity. The inclusion of UV-C treatment contributed to the reduction in the initial total bacteria at 3.30 log CFU/g and its combination with nano-coatings helped in the control of microbial growth during storage.

RESUMO

The purpose of the study was to develop a novel, directly compressible, co-processed excipient capable of providing a controlled-release drug system for the pharmaceutical industry. A co-processed powder was formed by adsorption of solid lipid nanoparticles (SLN) as a controlled-release film onto a functional excipient, in this case, dicalcium phosphate dihydrate (DPD), for direct compression (Di-Tab®). The co-processed excipient has advantages: easy to implement; solvent-free; industrial scaling-up; good rheological and compressibility properties; and the capability to form an inert platform. Six different batches of Di-Tab®:SLN weight ratios were prepared (4:0.6, 3:0.6, 2:0.6, 1:0.6, 0.5:0.6, and 0.25:0.6). BCS class III ranitidine hydrochloride was selected as a drug model to evaluate the mixture's controlled-release capabilities. The co-processed excipients were characterized in terms of powder rheology and dissolution rate. The best Di-Tab®:SLN ratio proved to be 2:0.6, as it showed high functionality with good flow and compressibility properties (Carr Index = 16 ± 1, Hausner Index = 1.19 ± 0.04). This ratio could control release for up to 8 h, so it fits the ideal profile calculated based on biopharmaceutical data. The compressed systems obtained using this powder mixture behave as a matrix platform in which Fickian diffusion governs the release. The Higuchi model can explain their behavior.

Assuntos

RESUMO

The release kinetics, stability, and antioxidant capacity of thyme essential oil polymeric nanocapsules as a function of encapsulating (poly-ε-caprolactone and ethylcellulose) and stabilizing (polyvinyl alcohol and Pluronic® F-127) polymers were established. Samples were evaluated in terms of particle size, zeta potential, release kinetics, calorimetry, infrared spectra, antioxidant capacity, and diffuse reflectance. The particle size obtained was below 500 nm in all cases, ensuring nanometric size. Zeta potential as a function of the stabilizing polymer. Encapsulation efficiency was higher in the samples that contained ethyl cellulose (around 70%), associated with its affinity for the molecules contained in the essential oil. Differential scanning calorimetry revealed a strong dependence on the encapsulating polymers as a function of the melting temperatures obtained. Infrared spectra confirmed that the polymeric nanocapsules had the typical bands of the aromatic groups of thyme essential oil. The antioxidant capacity evaluated is a function exclusively of the active content in the nucleolus of the nanocapsules. Nanoencapsulation was not a significant factor. Diffuse reflectance revealed high physical stability of the dispersions related directly to the particle size and zeta potential obtained (either by ionic or steric effect). These findings confirm favorable characteristics that allow proposing these systems for potential applications in food processing and preservation.